Functions
Function
5. Channel Setting
Belt packs should be set to the same channel number for communication.
Depending on your system's configuration, you may have multiple channels. Belt packs on
the same channel can communicate to each other..
The X12 belt pack can have a maximum of six talk paths (channels). Your X12
STEP 1
belt pack is pre-programmed depending on the number of channels that has
been purchased with your order. Channels 5 and 6 are usually reserved for the
X12M Mini Helmet Receiver. The XLE has a maximum of 2 channels.
OPTION 1
OPTION 2
When Rotation is turned "OFF" the channel selection will stop at the first
or last channel programmed into your belt pack. If you press
channel selection will stop at channel 1. If you press
selection will stop at the last channel programmed into your belt pack.
When Rotation is turned "ON" the channel selection will rotate. If your
belt pack is set to the last channel and you press
rotate to channel 1. If you press
1, the belt pack will go to the last channel programmed in your belt pack.
Select a channel number
by pressing Channel Up or Down button
and your belt pack is on channel
-07-
the
+
, the channel
+
the belt pack will