Toledo CV180BLEUS15 Installation And Programing Instructions

Programing Instructions

Model: CV180BLEUS15
Before starting, be sure you assemble the door lock correctly.
Step # 1

Reset

→ Press the
Step # 2 with deadbolt unlocked.

Door Direction Setting

→
+
→
→
→
Step # 3 with deadbolt unlocked.

Delete All User Code (UC)

→
+
→
→
→
Step # 4 with deadbolt unlocked.

Add New User Code (UC)

→
+
→
→
→
→ Enter the new four (4) to ten (10) digit user code (UC) number.
→
Step # 5 with deadbolt unlocked.

Enable or Disable the Auto-Lock

→
+
→
→
→
Step # 6 with deadbolt unlocked.

Customize the Auto-Lock Timer

→
+
→
→
→
→ Enter numbers from
between ten (10) to ninety nine (99).
→
Step # 7 with deadbolt unlocked.

Bluetooth Settings Manual

→ Download the
→ Set your username.
→ The default programing code is going to be 0000. (change the default programing
code) (see the step one on the advanced programing section below)
→ Set
lock name
→ Make sure to
→ Press the
button for ten (10) seconds until you hear three (3) beeps.
+ + - Programing Code (PC) Number
+ + - Programing Code (PC) Number
+ + - Programing Code (PC) Number
+ + - Programing Code (PC) Number
+ + - Programing Code (PC) Number
+ to
BLE Smart Lock
for your door lock.
click the checkmark
connect
button.
+ in order to configurated seconds
on or at the
circle.