Toledo V190TBIUS15 Quick Start Manual

Programing Instructions
Model: V190TBIUS15
Before starting, be sure you assemble the door lock correctly.
Step # 1

Reset

→ Remove one of the batteries.
→ Touch the keypad for three (3) seconds.
→ Unlock the door.
→ Put the battery again.
→ Press on the keypad the following numbers: , , , and .
→ And then the door lock will be RESET.
Step # 2 with deadbolt unlocked.

Delete All User Code

→
+ + + - Programming Code (PC) Number
→
→
→
Step # 3 with deadbolt unlocked.

Add New User Code

→
+ + + - Programming Code (PC) Number
→
→
→
→ Enter the new four (4) to ten (10) digit user code (UC) number.
→
Step # 4 with deadbolt unlocked.

Enable or Disable the Auto-Lock

→
+ + + - Programming Code (PC) Number
→
→
→
Step # 5 with deadbolt unlocked.

Customize the Auto-Lock Timer

→
+ + + - Programming Code (PC) Number
→
→
→
→ Enter numbers from + to + in order to configurated seconds between ten
(10) to ninety nine (99).
→