Toledo V160ELPLUUS15 Quick Start Manual

Programing Instructions

Model: V160ELPLUUS15 and V160ELPLUUS514
Before starting, be sure you assemble the door lock correctly.
Step # 1

Reset

→ Remove one of the batteries.
→ Press and hold
→ Press
+ +
Step # 2 with deadbolt unlocked.

Delete All User Code

→ Press the
→
+
→
+
→
→
→ Let the red light disappear.
Step # 3 with deadbolt unlocked.

Add New User Code

→ Press the
→
+
→
→ +
→
→ Enter the new four (4) to ten (10) digit user code (UC) number.
→
→ Let the red light disappear.
Step # 4 with deadbolt unlocked.

Enable or Disable the Auto-Lock

→ Press the
→
+
→
+
→
→
→ (ON)
→
→ Let the red light disappear.
→ Or
→ (OFF)
→
→ Let the red light disappear.
Step # 5 with deadbolt unlocked.

Customize the Auto-Lock Timer

→ Press the
→
+
→
+
→
→
→ Enter numbers from
between ten (10) to ninety nine (99).
→
→ Let the red light disappear.
while inserting the battery and hold until the long beeps stop.
+ + + to configurate the opening direction.
for one (1) second until you hear a beep and the red light appear.
+ + + + - Programing Code (PC) Number
for one (1) second until you hear a beep and the red light appear.
+ + + + - Programing Code (PC) Number
for one (1) second until you hear a beep and the red light appear.
+ + + + - Programing Code (PC) Number
for one (1) second, until you hear a beep and the red light appear.
+ + + + - Programing Code (PC) Number
+ to + in order to configurated seconds