Fisher PDG-DXT10KL User Manual page 129

8. Specifications
Test Mail
Send a test mail to check if your settings are correct. Click to "Execute" to enable this feature.
Test Mail Status Button: Click to display the test result.
Sample of a message sent from the projector:
Projector Name: X X X X
Lamp 1 or 2 Hours Used: xxxx [H]
The lamp is at the end of its usable life. Please replace the lamp.
Note:
If you entered an incorrect address in a test, you may not receive an Alert mail. Should this happen, check if
the Recipient's Address is correctly set.
Unless any one of the [Sender's Address], [SMTP Server's Name] or [Recipient's Address 1-3] is selected,
[Test Mail] is not available.
PJLink
This option allows you to set a password when you use the PJLink feature.
On/Off: Enable or disable the password.
Password: Enter a password (up to 32 characters)
Note:
PJLink is a standardization of protocol used for controlling projectors of different manufacturers. This stan-
dard protocol is established by Japan Business Machine and Information System Industries Association
(JBMIA) in 2005.
The projector supports all the commands of PJLink Class 1.
P I
ROJECTOR
Computer 1
Computer 2
Video
S-Video
Component
Computer 3
PJL I
NPUT INK NPUT
RGB 1
RGB 2
VIDEO 1
VIDEO 2
VIDEO 3
DIGITAL 1
P
ARAMETER
11
12
21
22
23
31
120