Fisher PDG-DXT10KL User Manual page 131

8. Specifications
F
UNCTION
Input Select Panel
Projector Status Panel
Note:
The functions that can be controlled will vary depending on the signal being input to the projector
(see Selecting an Input Source on page
S
ETTING
Computer1 – Switches to the COMPUTER 1 IN connector
Computer2 – Switches to the COMPUTER 2 IN connector
Computer3 – Switches to the COMPUTER 3 IN connector
Component – Switches to the COMPONENT IN connectors
Video – Switches to the VIDEO IN connector
S-Video – Switches to the S-VIDEO IN connector
Refresh – Updates the panel with the latest
information available
Lamp1 life remaining – Displays the remaining life of Lamp 1 as a
percentage
Lamp2 life remaining – Displays the remaining life of Lamp 2 as a
percentage
Lamp1 time – Displays the number of hours Lamp 1 has been used
Lamp2 time – Displays the number of hours Lamp 2 has been used
PJ time – Displays the number of hours the project has been used
Error Status – Displays the status of errors
occurring within the projector
This switches the input connector of the projector
This displays the status of selected projector functions
34 for more information).
122
D
ESCRIPTION