Table of Contents
Advertisement
DCS-2500T
• Never bridge (short circuit) the battery contacts or the charger's terminals
with metallic objects.
• Protect from direct sunlight, heat and open flames and never throw
battery into fire; there is a risk of explosion.
• In the event of smoke or fire in the charger, disconnect it from the wall
outlet immediately.
• If the connecting cord is damaged, immediately disconnect the plug from
the power supply to avoid the risk of electric shock.
• Do not expose battery to microwaves or high pressure.
• To reduce the risk of stumbling, position and mark the connecting cord in
such a way that it cannot be damaged or endanger others.
The battery comes partially charged from the factory and needs to be
fully charged before first use. Charge the battery when it no longer
produces sufficient power to operate the unit or when battery lights
indicate that the battery is low.
1.
Plug charger AC cord in the
wall outlet.
2.
Align ridges on battery with
grooves on charger, and slide
battery into charger.
3.
During normal charging, the
charger LED (A) will blink
GREEN.
If charger detects a problem, LED will blink RED. Remove battery
from charger, clear obstructions from contacts and reinstall battery
into charger. If battery is outside acceptable temperature range (0°C
to 60°C, 32°F to 140°F) LED will remain RED.
X7508220200
© 10/21 ECHO Incorporated
ASSEMBLY
A
31
Advertisement
Table of Contents
