Draining Water - Whirlpool DB200 Owner's Instructions Manual

WATER FULL
Draining Steps
ull it out by gripping both sides
of the water bucket.

DRAINING WATER

The FULL indicator will light up when the water bucket is full. The
machine stops automatically and you need to empty the water
bucket.
Do not remove the sensor on the
water bucket which is used for
and cause an electric shock.
wash it with cold or warm water. Do
chemicals cloth or other materials to
damage the water bucket and caused
water leakage.
If you pulled out the water bucket
during operation or pull out
immediately after turning off the
minutes when you stopped the
machine to take out the water bucket.
Push the water bucket into the
machine properly. If the water bucket
indicator will light up and the machine
will not work.
11
3