Specifications - Ferris 5000/61RCE Operator's Manual

Specifications

NOTE: Specifications are correct at time of printing and are subject to change without notice.
* Actual sustained equipment horsepower will likely be lower due to operating limitations and environmental factors.
ENGINE:
31.5 HP* Caterpillar
Make Caterpillar
Model 3013
Horsepower 31.5 @ 3600 rpm
Displacement 91.54 Cu. in (1500 cc)
Electrical System 12 Volt, 16 amp. Alternator, Battery: 500 CCA
Oil Capacity 11.5 Pt. (5.4 L) w/ Filter
CHASSIS:
Fuel Tanks Capacity: 13 Gallons (49.2 L) Total
Rear Wheels Tire Size: 26 x 12.00 -12
Inflation Pressure: 15 psi (1,03 bar)
Front Wheels Tire Size: 13 x 6.50 - 6
Inflation Pressure: 25 psi (1,72 bar)
TRANSMISSIONS:
HydroGear BDP-21 / Parker TF-040
Type Pump and Wheel Motor
Hydraulic Fluid Mobil 1™ 15W-50 synthetic oil or
Castrol Syntec™ 5W-50 oil
Speeds Forward: 0-11 MPH (0-17.7 km/h)
@ 3400 rpm Reverse: 0-5 MPH (0-9.65 km/h)
Continuous Torque 483 ft. lbs. (654 N.m.)
Output
Maximum Weight 3000 lbs. (1360 Kg)
on Axle
DIMENSIONS:
Overall Length 87" (221 cm)
Overall Width
72" Side Discharge 85" (216 cm)
72" Rear Discharge 73" (185 cm)
61" Side Discharge 62" (157 cm)
Height 55" (140 cm)
Weight (apx.)
w/ 72" Deck 1908 lbs. (865 kg)
w/ 61" Deck 1887 lbs. (856 kg)
42