Advertisement
Note:In some service positions the components or copper patterns of one board may risk touching its
neighbouring pc boards or metallic parts. To prevent such short-circuit use a piece of hard paper or other
insulating material between them.
Dismantling of the SPK_L/R assembly
1) Loosen 2*2 screws " A " at both side of SPK_L/R as shown in fi gure 1.
Dismantling of the SPK_L/R Boards
1) Loosen 2*2 screws "B" at both side of SPK_L/R to remove the rear Housing as shown in fi gure 2.
Dismantling of the Bottom cover
1) Loosen 4 screws "C" at the bottom cover as shown in fi gure 3.
Dismantling of the AUX & OPTICAL Board
1) Loosen 2 screws "D"& "E" to remove the brakcet as shown in fi gure 4 and fi gure 5.
3) Loosen 1 screws "F" at the brakcet to remvoe the AUX & OPTICAL board as shown in fi gure 6.
D
Figure 4
All manuals and user guides at all-guides.com
4- 1
A
Figure 1
B
Figure 2
C
Figure 3
F
E
Figure 5
Figure 6
Dismantling of the VFD+BT Boards
1) Loosen 2 screws "F" on the top of VFD+BT board as shown in fi gure 7.
Dismantling of the MAIN Boards
1) Loosen 4 screws "G" on the top of Main Board as shown in fi gure 8.
Dismantling of the MP3&USB Boards
1) Loosen 2 screws "I" on the top of MP3&USB Board as shown in fi gure 9.
4 - 1
G
Figure 7
H
Figure 8
I
Figure 9
Advertisement
