Electrolux EFC 6441 Operating And Installation Instructions page 13

All manuals and user guides at all-guides.com
Installation
• Place the three rubber strips on the back of
the cooker hood.
Where necessary mount the two spacers
provided on the drill holes for definitive fixing.
The spacers are useful when the wall which is
to house the cooker hood is not perfectly
vertical (for example: where it is partially
covered with wall tiles).
• Mark the wall with a centre line, this will aid
mounting procedure (1), position the template
so that the mid line printed on the template
matches with the centre line previously
marked, the lower side of the template
corresponds to the lower side of the hood
once mounted (2).
• Drill two holes Ø 8mm and fix the support
bracket with two wall plugs and screws (3).
• Remove the front panels (see paragraph
“Removing the front panels”).
• Hang the hood (4) adjust its position (5-6)
and from the inside of the hood sign two
points for definitive fixing (7), remove the
hood and drill two holes Ø 8mm (8), fit two
wall plugs, hang the hood again and fix it
securely with two screws (9). Cover the drill
holes for screws with the two screw caps
provided.
rubber
strips
definitive
fixing
4
(5x18)
6
(5x18)
6
5
5
9
48
rubber strips
rubber strips
definitive
fixing
spacers
4
3
7
8
8
2
1