4. Remove cover from control box and disconnect thermostat
and power wires from the board.
5. Slide blower forward on rails toward front of unit.
Copyright 2003 CARRIER Corp. • 7310 W. Morris St. • Indianapolis, IN 46231
Manufacturer reserves the right to discontinue, or change at any time, specifications or designs without notice and without incurring obligations.
Book 1 4
PC 101
Catalog No. 535–80076
Tab 6a 8a
6. Reverse items 1 through 5 to re-install blower. Refer to wiring
diagram (Fig. 3 or 4) of these instructions or diagram located
on inside of blower door to properly rewire unit.
Printed in U.S.A.
Form 58CMA-4SI
Pg 12
9-03
Replaces: 58CMA-3SI
58cma4si