Product Output (Electricity) - iClever IC-OD45B User Manual

1.4 Charging Waiting State
There is strict protection for product's charging. If the product is discharged or the
temperature is outside the safe temperature (0~45℃ /32~113 ℉ ), the product enters
the charging waiting stage. If the internal temperature of the product is within the safe
range, it will automatically start charging. The display screen shows the following
"temperature alarm mark".

2. Product Output (Electricity)

The product has high and low voltage protection, high and low temperature protection,
multiple overcurrent protection, short circuit protection and more. If the output is
suddenly interrupted, first check whether the external electrical appliances exceed
the power or whether the short circuit occurs, and then restart to check whether there
is electricity. After use, please turn it off in order to save the power. If there is any
abnormality, please contact the manufacturer or dealer.
This product is designed with 4-zone function outputs, namely DC zone, USB zone,
AC zone, and LED zone. Each zone comes with a corresponding button to turn on or
off the output of all interfaces or functions in the corresponding zone. Press and hold
the button in the corresponding area for about 1 second to open all interfaces in the
corresponding zone. Press the button again for about 1 second to close all interfaces
in the corresponding area. If you long pressed the button for more than 3S during the
shutdown process, the entire system will shut down.
2.1 AC Output
Long press the AC button in the AC zone for about 1 second to turn on the AC output,
and the display screen will show the AC icon and current frequency; in this case, long
press the AC button for about 1 second and the AC output will be turned off. During this
process, long pressing the button for more than 3S and the entire system will shut down.
23
2.1.1 AC Output Frequency Switching
After turning on the AC output function, short press the AC button three times to
switch the AC output frequency (50Hz and 60Hz). After successful switching, the
corresponding position of the display screen will show the current frequency. Please
choose the frequency according to the local power grid or electrical appliances. It will
remember the last frequency after it's off. Shown as follows:
2.2 DC Zone Output
Long press the DC button in the DC zone for about 1 second to turn on DC5521 and
Cigar Light output, and the display screen will show the DC icon. In this case, long
pressing the DC button again for about 1 second to turn off the DC5521 and Cigar
Light output. During the shutdown process, long pressing the button for more than 3
seconds and the entire system will shut down.
2.3 USB Zone Output
Long press the USB button in the USB area for about 1 second to turn on the USB-A
and USB-C output, and the display screen will show the USB-A and USB-C icons.
In this case, long pressing the USB button again for about 1 second will turn off the
USB-A and USB-C output. During the shutdown process, long pressing the button for
more than 3 seconds and the entire system will shut down.
2.4 LED Lighting
Press and hold the Light button in the Light zone for about 1 second to turn on the
Light mode. When the Light mode is working, press and hold the Light button again for
about 1 second to turn off the Light mode. During the shutdown process, long pressing
the button for more than 3 seconds and the entire system will shut down.
24