Honda GXE2.0H Manual page 52

dummyhead dummyhead
CONTROL UNIT
Parts
[1] SPEED CONTROL LEVER
[2] RETAINER
[3] TAPPING SCREW (5 mm) (5)
[4] CONTROL COVER
[5] GROMMET
[6] 10P (Black) CONNECTOR
[7] START/STOP SWITCH
[8] BAND
[9] 3P (Black) CONNECTOR
[10] TAPPING SCREW (5 mm) (2)
[11] VOLUME SWITCH ASSEMBLY
[12] NUT (10 mm)
[13] SWITCH BRACKET
[14] SPEED VOLUME SWITCH
[15] 2P (Black) CONNECTOR
[16] POWER SWITCH
[17] BAND
[18] 2P (Black) CONNECTOR (3)
[19] ALERT INDICATOR
[20] ERROR INDICATOR
[21] POWER INDICATOR
[22] BOLT (6 x 14 mm) (4)
[23] BOX BRACKET
[24] CONTROL CASE
[25] CASE MOUNT BRACKET
6-4
Variable-speed type
REMOVAL: Raise the lever around it evenly to remove it.
INSTALLATION: Align the flat surfaces.
Variable-speed type
INSPECTION: page 6-8
INSTALLATION: Secure the switch wire to the box bracket.
[9] – [14]; Variable-speed type
INSTALLATION: Temporarily tighten and then tighten securely with the switch bracket
turned clockwise. After installing the control lever, make sure the lever is not interfered
with the control cover.
INSPECTION: page 6-9
INSPECTION: page 6-8
INSTALLATION: Secure the three indicator wires.
INSTALLATION: Connect with the same colors on the wire tape.
Yellow tape
Red tape
(No tape)
Remarks