Power Management Feature - Iiyama Vision Master Pro452 User Manual

POWER MANAGEMENT FEATURE

The power management feature of this product complies with every power saving requirement of
E S ® , VESA DPMS and Nutek 803299. When activated, it automatically reduces
NERGY TAR
unnecessary power consumption of the monitor when your computer is not in use.
To use the feature, the monitor needs to be connected to a VESA DPMS compliant computer. These
are the three power management steps the monitor takes as described below. The required
settings, including the timer setting, should be made by the computer.
n
Stand-by Mode
When the H-sync signal from the computer is off, the monitor enters into Stand-by Mode which
reduces the power consumption to less than 15W. The screen becomes dark, and the power
indicator turns to orange. From Stand-by Mode, the screen reappears instantaneously when
the keyboard or the mouse is touched again.
n
Suspend Mode
When the V-sync signal from the computer is off, the monitor enters into Suspend Mode which
reduces the power consumption to less than 15W. The screen becomes dark, and the power
indicator turns to orange. From Suspend Mode, the screen reappears instantaneously when
the keyboard or the mouse is touched again.
n
Active-off Mode
When the H and V sync signals from the computer are off, the monitor enters into Active-off
Mode which reduces the power consumption to less than 3W. The screen becomes dark, and
the power indicator turns to orange. From Active-off Mode, the screen reappears in 10 seconds
when the keyboard or the mouse is touched again.
NOTE Even when using the power management mode, the monitor consumes electricity. Turn
off the Power Switch whenever the monitor is not used, during the night and weekends,
to avoid unnecessary power consumption.
12 OPERATING THE MONITOR
All manuals and user guides at all-guides.com