Advertisement
R
K
A
ACKMOUNT
IT
1. Assemble the handles (Item #5) to the front plate (Item # 4) using four pan head screws
(Item #6). Note: Place handle on the side with the seven countersink holes.
2. Assemble the rackmount kit by mounting the base plate (Item #1) to the front plate
(Item #4) using two #6 flat head screws (Item #7) and two #4 flat head screws (Item #12).
3. Attach the left and right side plates (Item #2 and 3) to the front plate (Item #4) using four
flat head screws (Item #7).
4. Secure the left and right side plates (Item #2 and 3) to the base plate (Item #1) using six
pan head screws (Item #10).
5. Place the four bumper (Item #13) onto the base plate (Item #1). Locate the bumpers
approximately 1" inward from the center of the four large holes on the base plate.
FIGURE 1
I
SSEMBLY
NSTRUCTIONS
Advertisement
