Advertisement
Adjust the image
1
If you don't see an image, press the Source Search button on the
projector or projector remote control to select the image source.
Note: If you still see a blank screen or have other display problems, see
the troubleshooting tips.
2
To raise the image, press the foot release button and lift the front of the
projector. Release the button to lock the foot in position.
3
To reduce or enlarge the image, press the E-Zoom buttons on the
projector remote control.
4
To sharpen the image, turn the focus ring.
5
If your image looks like
or
off to one side of the screen at an angle. Place the projector directly in
front of the center of the screen, facing the screen squarely. If you can't
move the projector, use the horizontal keystone slider on the projector to
correct the image shape.
6
Your projector automatically adjusts an image that looks like
but if necessary you can press the
correct it.
Using the remote control
Projector remote control
Turn projector
on and off
Access projector
menus
Turn off projector
display
, you may have placed the projector
or
or
button on the projector to
Choose which source
to display
Navigate projector
menus
Access the Home
screen
Android TV remote control
Turn streaming
device on and off
Enter a selection
Go back to previous
function
Adjust volume
For more information on using the remote controls, see the online User's Guide.
Note: You must pair the Android TV remote control to the included streaming
device to use Android TV and video-on-demand features. See the online User's
Guide for more information.
Troubleshooting
•
If you see a No signal message after turning on the projector, make
sure your computer or video device is properly connected, and press the
Source Search button.
•
If you see a blank screen, check the following:
•
Make sure the A/V Mute slide is open all the way.
•
Make sure the Status light on the projector is blue and not flashing.
•
Press the
sleep mode, if necessary.
•
If you see a blank screen when a computer is connected, check the
following:
•
On some Windows
and press F7 or the function key that lets you display on an external
monitor. It may be labeled CRT/LCD or have an icon such as
On Windows 7 or later, hold down the Windows key and press P at
the same time, then click Duplicate.
•
,
If you're using a Mac laptop, open System Preferences and
select Displays. Click the Arrangement tab and select the Mirror
Displays checkbox.
•
If the projector does not respond to the projector remote control, make
sure the batteries in the projector remote control are installed correctly.
Replace the batteries if necessary.
•
If the Android TV streaming device does not respond to the remote
control, try the following:
•
Make sure you are using the Android TV remote control and that it
is paired with the streaming device.
•
Press the HDMI button on the projector remote control to select the
HDMI input.
•
Press the
make sure the streaming device is turned on.
Registration
Register today to get product updates and exclusive offers. You can register
online at www.epson.com/webreg.
Use voice commands
with Android TV
Navigate menus
Display the Android
TV home screen
Display the Android
TV application list
Open streaming apps
power button to wake the projector from standby or
®
laptops, you may need to hold down the Fn key
power button on the Android TV remote control to
.
Advertisement
