Creative MuVo VIDZ User Manual page 37

CONTROL
PROGRAM: Allows you to listen to the selected
tracks only.
To perform track programming:
Press and hold the
[NAVI/B-MARK (EQ)] button to
enter Navigation mode. After selecting
a desired track with the jog key,
press the [NAVI/B-MARK (EQ)]
button briefly to save it.
To play programmed tracks:
Go to 'MENU CONTROL PROGRAM'
by pressing and holding the jog key
and then the PROGRAM list is
displayed. Select a track to begin play
with and push the jog key in the >>
direction to play tracks in the
programmed order.
Creative MuVo VIDZ User Guide
Jog key Move/Select
RECORDING: Adjust the recording quality of
external input, FM radio and voice
recording.
- BITRATE: Specify the recording quality that you
want. A low bit rate decreases file size
but yields poorer sound quality. A high
bit rate yields better sound quality but
increases the file size, shortening the
max. Recording time.
- AUTO SYNC: This function automatically detects
when there is no incoming signal
during encoding (recording) and
saves the input in separate files.
(Signals following about 3 seconds of
silence are saved as separate files.)
37