Safety Information; Intended Use - fischertechnik ROBOTICS TXT 4.0 Operating Manual

ROBOTICS
TXT 4.0 CONTROLLER

SAFETY INFORMATION

Inspect the charger regularly for damage.
›
In case of damage, the charger may not be used until repairs are completed.
›
Do not insert the wires into an outlet!
›
Non-rechargeable batteries cannot be charged!
›
Remove rechargeable batteries from the battery compartment before charging.
›
Only charge rechargeable batteries with adult supervision.
›
Insert batteries with the correct polarity.
›
Connection terminals may not be short circuited.
›
The ROBOTICS TXT 4.0 Controller may only be operated with a fischertechnik power supply, such as the Battery
›
Pack 35537 or Power Supply 9V DC, 2.3-2.5A.
When connecting the Battery Pack to the Controller, observe the following:
›
Connect the plus pole of the "9V IN" connection to the plus pole (+) of the Battery Pack.
›
Connect the minus pole of the "9V IN" connection to the minus pole (-) of the Battery Pack.
›
The maximum operating temperature is 40°C.
›
Do not allow sharp or pointed objects to come into contact with the touch display, as this may cause damage!
›

INTENDED USE

The Controller may only be used to operate and control fischertechnik models.
© Copyright 2001-2021 fischertechnik GmbH | Klaus-Fischer-Straße 1 | 72178 Waldachtal
fischertechnik TXT Operating manual_EN | 10. November 2021, 9:18 PM
04