Selecting And Launching Programs - fischertechnik ROBOTICS TXT 4.0 Operating Manual

ROBOTICS
TXT 4.0 CONTROLLER

SELECTING AND LAUNCHING PROGRAMS

First, a program must be transmitted to the ROBOTICS TXT 4.0 Controller via download from a PC. The process
›
for testing the connection and the exact procedure for downloading programs are described in the Help section
for the "ROBO Pro Coding software."
If a program is loaded from ROBO Pro Coding to the Controller, it can be launched immediately.
›
The process is stopped by touching the green bar on the display or the Stop symbol in ROBO Pro Coding.
›
Changes to the start process can be assigned individually to each program file, such as Auto start or Auto load.
›
These changes can be made in the menu: File | "File name X" | Select settings.
Details on the individual functions are described in the "Menu in detail" section.
© Copyright 2001-2021 fischertechnik GmbH | Klaus-Fischer-Straße 1 | 72178 Waldachtal
fischertechnik TXT Operating manual_EN | 10. November 2021, 9:18 PM
22