Download
Share
Print this page
Mitsubishi Electric MSB-20EXML35-501 Service Bulletin
  1. Manuals
  2. Brands
  3. Mitsubishi Electric Manuals
  4. Air Conditioner
  5. MSB-20EXML35-501
  6. Service bulletin
Mitsubishi Electric MSB-20EXML35-501 Service Bulletin

Mitsubishi Electric MSB-20EXML35-501 Service Bulletin

Hide thumbs

Advertisement

Quick Links

Download this manual
Correction
PURPOSE :
Correction of the procedure about STEERING WHEEL SENSOR
SUBJECT :
CALIBRATION
Gr:35 (ACTIVE STABILITY CONTROL SYSTEM, ONVEHICLE SERVICE)
GROUP :
Description :
1.
Please refer to the attached documents for correcting error described in the applicable workshop
manual.
Affected service manuals :
2.
Please refer to the attached document (Attached sheet 1)
About the details :
3.
Please refer to the attached documents (Attached sheet 3-7)
MSB-20EXML35-501(20AB039)
MSB-20EXML35-501
ISSUE NO. :
DATE : 2020-08-28
<DESTINATION/MODEL>
<M/Y>
(EU/NEW ZEALAND/
11-17.5
MMNA/USTP/MMAL)
i-MiEV(HA0V/HA0W)
1

Advertisement

loading

Related Manuals for Mitsubishi Electric MSB-20EXML35-501

Summary of Contents for Mitsubishi Electric MSB-20EXML35-501

  • Page 1 Correction MSB-20EXML35-501 DATE : 2020-08-28 PURPOSE : ISSUE NO. : Correction of the procedure about STEERING WHEEL SENSOR <DESTINATION/MODEL> <M/Y> SUBJECT : (EU/NEW ZEALAND/ 11-17.5 CALIBRATION MMNA/USTP/MMAL) i-MiEV(HA0V/HA0W) Gr:35 (ACTIVE STABILITY CONTROL SYSTEM, ONVEHICLE SERVICE) GROUP : Description : Please refer to the attached documents for correcting error described in the applicable workshop manual.

  • Page 2: Australia/New Zealand

    *As for 2017 MY vehicles, refer to 2016 i-MiEV Service Manual (MSCD-018B-2016). AUSTRALIA / NEW ZEALAND Applicable manual Pub. No. Applicable title (Info-ID) Content 2012 <AUSTRALIA> AU900209 STEERING WHEEL SENSOR CALIBRATION Attached sheet 3 i-MiEV <NEW ZEALAND> DRAFT (M355-00-920-31600-01) Workshop Manual 2013.5 <AUSTRALIA> AU900303 i-MiEV <NEW ZEALAND> DRAFT Workshop Manual MSB-20EXML35-501(20AB039)
  • Page 3 Completed" is displayed. Then, press the "OK" position, and then set M.U.T.-III. button. 5. Turn the electric motor switch to the "ON" position. On the Menu, select "System selection." In "System table" of "System selection," select "Steering angle sensor," and then press the "OK" button. MSB-20EXML35-501(20AB039)
  • Page 4 Check the execution conditions." is displayed. Then, press the "OK" button. 22."Execute command: Executed" is displayed. Then, press the "OK" button. The neutral point is learned. Turn the electric motor key to the "LOCK" position, and remove M.U.T.-III from the vehicle. <Changed> MSB-20EXML35-501(20AB039)
  • Page 5 M.U.T.-III. 5. Turn the electric motor switch to the "ON" position. 6. On the Menu, select "System selection." 7. In "System table" of "System selection," select "Steering angle sensor," and then press the "OK" button. MSB-20EXML35-501(20AB039)
  • Page 6 Check the execution conditions." is displayed. Then, press the "OK" button. 22."Execute command: Executed" is displayed. Then, press the "OK" button. 23.The neutral point is learned. 24.Turn the electric motor key to the "LOCK" position, and remove M.U.T.-III from the vehicle. <Changed> MSB-20EXML35-501(20AB039)
  • Page 7 7. In "System table" of "System selection," select 18. In the "ABS/ASC/ASTC" field, select "Special "Steering angle sensor," and then press the "OK" function". button. 19.In the "Special function," select "Learn sensor 8. In "Steering angle sensor," select "Special neutral position." function." <Deleted> TSB Revision MSB-20EXML35-501(20AB039)

  • Page 8: Removal And Installation

    OFF switch is released (Not pressed being operated) ACA01062AB Continuity between No continuity Continuity exists (2 Ω or terminal No. 1 and No. 2 less) Continuity between Continuity Continuity terminal No. 3 and exists exists No. 4 TSB Revision MSB-20EXML35-501(20AB039)
  • Page 9 "LOCK" (OFF) position, and then set scan tool. 14."Learn neutral position of steering angle sensor: 5. Turn the electric motor switch to the "ON" Completed" is displayed. Then, press the "OK" position. button. 6. On the Menu, select "System selection." TSB Revision MSB-20EXML35-501(20AB039)
  • Page 10 1. As shown in the figure, connect the circuit tester to the ASC OFF switch as a single unit. 2. Check the continuity status when the ASC OFF switch is pressed and when the switch is released. ACA01062AB TSB Revision MSB-20EXML35-501(20AB039)
  • Page 11 "LOCK" (OFF) position, and then set scan tool. 14."Learn neutral position of steering angle sensor: 5. Turn the electric motor switch to the "ON" Completed" is displayed. Then, press the "OK" position. button. 6. On the Menu, select "System selection." TSB Revision MSB-20EXML35-501(20AB039)
  • Page 12 1. As shown in the figure, connect the circuit tester to the ASC OFF switch as a single unit. 2. Check the continuity status when the ASC OFF switch is pressed and when the switch is released. ACA01062AB TSB Revision MSB-20EXML35-501(20AB039)