Asus DSL-AC55U User Manual page 49

4. In the WPS Method field, select PBC or PIN Code. If you select
PBC, go to step 5. If you select PIN Code, go to step 6.
5. To set up WPS using the router's WPS button, follow these
steps:
a. Click Start WPS or press the WPS button found at the rear of
the xDSL modem router.
b. Press the WPS button on your wireless device. This is
normally identified by the WPS logo.
NOTE: Check your wireless device or its user manual for the location of
the WPS button.
c. The xDSL modem router will scan for any available WPS
devices. If the xDSL modem router does not find any WPS
devices, it will switch to standby mode.
6. To set up WPS using the Client's PIN code, follow these steps:
a. Locate the WPS PIN code on your wireless device's user
manual or on the device itself.
b. Key in the Client PIN code on the text box.
c. Click Start WPS to put your xDSL modem router into WPS
survey mode. The router's LED indicators quickly flash three
times until the WPS setup is completed.
49