LG PWFMDB200 Installation Manual page 13

Synchronize product connection information
- It is able to check the number of air conditioners available to con-
nect to the cloud gateway.
- By clicking next the app will send and receive information with the
cloud gateway.
- The app sends and receives product information and registers prod-
uct information on the server.
- Once the product information is registered on the server, you can
check the registered cloud gateway and connected air conditioner
information on the main page of the app.
- The status display LED (red) of the cloud gateway is lighted and re-
mains lighted while the server is connected.
Add product and check setting
- Click on the cloud gateway on the main page to check the con-
nected air conditioner information.
- Addition of air conditioner and cloud gateway settings can be
checked/changed via the top right screen, addition of products and
Cloud Gateway Settings menu.
Controlling Air Conditioner via ThinQ
Control/ monitoring functions
The air conditioner control and information can be monitored via
ThinQ app.
Click Cloud Gateway on the main page to check the connected air
conditioner information.
The controllable items and condition information can be checked by
selecting the air conditioner that you want to check the control and
details.
Refer to the [Instructions] of ThinQ app for air conditioner control/
monitoring functions and instructions via ThinQ app.
Depending on the air conditioner model, some functions may not
work, and depending on the version of the ThinQ app, the image may
vary.
24 Cloud Gateway
When interlocking BECON cloud
To interlock the BECON cloud, you need to set it up through a sepa-
rate PC program.
Refer to the latest technical information for installation.
For the cloud gateway, address 00~0F is set as default setting.
When interlocking BECON cloud, you must delete the uninstalled in-
door unit and install.
CAUTION
!
The address must be set via separate PC program in order to use an
address outside the default setting.
The FF address cannot be used as an indoor unit address since in
the cloud gateway, its own address is set to FF.
Open source software guide
To obtain a developer source code for this product with on-board
GPL, LGPL, MPL or other open source license, visit
http://opensource.lge.com.
You can download the source code, content of all relevant licenses,
copyright notice, and a mark indicating that we bear no responsibility
for the code.
If you request the open source codes for the software installed in this
product by sending an e-mail to opensource@lge.com within 3 years
after the purchase of the product, the code will be provided in
CD-ROM for a minimum fee used to cover the costs of the media and
shipping.
Wireless Product Specifications
Frequency range
Output Power(Max)
2412 MHz ~ 2462 MHz
< 30 dBm
Installation Manual 25