Table of Contents
Advertisement
3) Press
or
to select "DISPLAY", then
s
B
confirm.
TV ASPECT
STILL MODE
ANGLE ICON
AUTO POWER OFF ON
VIDEO OUT
4) Press
or
to select the below items, then press
K
L
Select options following instructions below.
5) Press
SETUP
to exit.
QUICK
TV ASPECT :
4:3 LETTER BOX : When viewing a 16:9 picture on a 4:3
aspect TV screen, black bars appear on
the top and bottom of the screen.
4:3 PAN & SCAN : When viewing a 16:9 on a 4:3 aspect TV
screen, a full height picture with both
sides trimmed is presented.
16:9 WIDE
: if a wide-screen TV is connected to this
unit, select this setting.
• Press
or
to select a setting, then press
K
L
• The default setting is "4:3 LETTER BOX".
STILL MODE :
AUTO : select it usually.
FIELD : pictures in the Still mode will be stabilized although
they will be coarse due to a little amount of data.
FRAME : pictures in the Still mode will be highly defined
although they will be blurred due to outputting two
fields at the same time.
• Press
or
to select an option, then press
K
L
• The default setting is "AUTO".
ANGLE ICON :
ON : to show the angle icon when multiple camera angles
are available during DVD playback.
OFF : to hide the angle icon.
• Press
ENTER
repeatedly to select "ON" or "OFF".
• The default setting is "ON".
AUTO POWER OFF :
ON : to turn off the unit automatically after 35 minutes of
no use.
OFF : to keep this unit on.
ENTER
• Press
repeatedly to select "ON" or "OFF".
• The default setting is "ON".
VIDEO OUT :
AUTO : to change video out system (PAL/NTSC)
automatically according to the format of an inserted
disc.
• For the discs recorded with NTSC system, the
NTSC signal will be output and pictures of the
discs can be viewd on an NTSC or Multi system
TV.
• For the discs recorded with PAL system, the PAL
signal will be output and pictures of the discs can
be viewed on a PAL system TV.
PAL
: to view pictures of the discs recorded with NTSC
system on a PAL system TV. The modified PAL
signal will be output.
Note: •
The discs of recorded with PAL system cannot be
viewed on an NTSC system TV.
ENTER
• Press
repeatedlly to select "PAL" or "AUTO".
• The default setting is "AUTO".
ENTER
DISPLAY
4:3 LETTER BOX
AUTO
ON
AUTO
ENTER
.
ENTER
to
Parental Control
Parental Control limits the DVD viewing that exceeds your
settings. The password is required to change the "PARENTAL
LEVEL".
This feature prevents your children from viewing
inappropriate materials.
1) Press
SETUP
ENTER
.
2) Press
or
s
• CUSTOM mode screen will appear.
3) Press
or
s
4) Press the
•When doing this for the first time, enter any 4-digit
number by pressing the
4737), then press
the password from the second time onward. Record your
password in case you forget it.
•If you forget the password, press 4, 7, 3, 7. The original
password will be cleared and parental levels will be set to
"ALL". Enter a new 4-digit password, then press
5) Press
or
K
ENTER
.
.
6) Press
or
K
For details, see below.
7) Press
SETUP
PARENTAL LEVEL
"ALL"
: All parental locks are cancelled.
"8"
: DVD softwares of any grades (adult/general/
children) can be played back.
"7 to 2" : Only DVD softwares intended for general use
and children can be played back.
"1"
: Only DVD softwares intended for children can be
played back.
Note: •
This function may not work on some DVDs. Make
sure if the parental lock function operates in the way
you have set.
To Change the Password
1) Follow the steps
2) Press
or
K
3) Enter a new 4-digit password, then press
4) Press
SETUP
To Reset All the Settings of the SET UP
screen
1) Press
SETUP
2) Press
or
s
3) Press
or
K
the settings (except for "PARENTAL") will be cleared.
•To cancel the initialization, select "NO".
4) Press
SETUP
24
in Stop mode.
to select "CUSTOM", then press
B
to select "PARENTAL", then press
B
PARENTAL
PARENTAL LEVEL ALL
number buttons
to enter your 4-digit password.
number buttons
ENTER
. That number will be used as
to select "PARENTAL LEVEL", then press
L
to select the desired level, then press
L
to exit.
1)
4)
to
above.
to select "CHANGE", then press
L
to exit.
in Stop mode.
to select "INIT.", then press
B
INITIALIZE
Initialize?
NO
YES
to select "YES", then press
L
to exit.
ENTER
.
ENTER
.
(except for
ENTER
.
ENTER.
ENTER
.
ENTER
.
ENTER
.
ENTER
twice. All
EN
Advertisement
Table of Contents
