Table of Contents
Advertisement
Programmed Playback
You may determine the order in which tracks will be played.
1) In Stop mode, press
MODE
•The PROGRAM screen will appear.
2) Press
or
to select a track, then press
K
L
•Up to 99 tracks can be stored.
CLEAR
•Press
to erase the most recently entered track.
•To erase all tracks in the programme at once, select "ALL
CLEAR" at the bottom of the list and press
•When selecting an MP3 file or folder, use
follows:
Press
to go the next hierarchy.
B
Press
to go back to the previous hierarchy.
s
•When more than 8 tracks or files are programmed, press
SKIP
to see all the pages.
H,G
3) Press
PLAY
to start the programmed playback.
Note: •
While a programme is being played back,
as follows:
Press
STOP
, and then
programmed playback restarts.
(CD playback restarts from the current position. MP3
playback restarts from the beginning of the current
track.)
Press
STOP
twice and
restarts from the first track in the original order.
However, your programmed playback can be restarted
when you follow the above steps. (Your programme is
still stored unless either the disc tray is open or the unit
is turned off.)
•
To repeat the current track in the program, press
REPEAT
repeatedly until
playback.
•
To repeat the entire programme press
repeatedly until
Random Playback
This shuffles the playing order of tracks instead of playback in
the sequence.
1) In Stop mode, press
MODE
"RANDOM" screen appears on the TV screen.
RANDOM
PLAY
2) Press
PLAY
to start random playback.
Note: •
If you like to repeat the current track in the random
selections, press
REPEAT
appears during playback. If you like to repeat the
entire random selections, press
until
ALL appears during playback.
CD
.
CD-DA
ENTER
ENTER
Arrow
STOP
PLAY
next, so that the
PLAY
next, so that playback
TRACK appears during
REPEAT
ALL appears during playback.
CD
repeatedly until the
CD-DA
TOTAL 0:45:55
RANDOM PROGRAM
--no indication--
repeatedly until
REPEAT
repeatedly
On-Screen Information
You can check the information about the current playback by
MP3
DISPLAY
pressing
1) Press
DISPLAY
•Current chapter number/ total chapters, elapsed time
and remaining time of the current chapter , and current
playback status will be displayed.
DISPLAY
2) Press
.
•Current title number/ total titles, elapsed time and
remaining time of the current title, and current playback
status will be displayed.
3) Press
DISPLAY
.
•The bit rate (the amount of audio and video data
as
currently being read) and current playback status will be
displayed.
•Current repeat setting appears only when the repeat
setting is active.
( C: Chapter repeat/
repeat)
•If you are playing a 2-layered disc, the layer number will
works
also be displayed.
(L0: Layer 0 is playing, L1:Layer 1 is playing)
4) Press
DISPLAY
disappears.
1) Press
DISPLAY
•Current track number/ total tracks, elapsed time and
remaining time of the current track, and current
playback status will be displayed.
•Current repeat setting appears only when the Repeat
setting is active.
( T:Track repeat/ A:All Tracks repeat/ A B:A-B
repeat)
MP3
2) Press
DISPLAY
•Current track number/ total tracks, elapsed time and
remaining time of the current disc, and current playback
status will be displayed.
•Current repeat setting appears only when the Repeat
setting is active.
3) Press
DISPLAY
disappears.
TRACK
22
.
during playback.
11/16 0:00:00 - 0:03:30
again.
the third time.
T: Title repeat/ A B: A-B
repeatedly untill on-screen information
CD
during playback.
4/12 0:03:21 - 0:02:15
T
again.
repeatedly until on-screen information
DVD-V
VCD
EN
Advertisement
Table of Contents
