Assembly — Hanging the Fan (continued)
3
Making the electrical connections
WARNING:
To avoid possible electrical shock, ensure the
electricity is turned off at the circuit breaker or main fuse box
before wiring.
WARNING:
Check to see that all connections are tight,
including the ground, and that no bare wire is visible at the
wire nuts, except for the ground wire.
□ Hang the motor assembly(C) onto the mounting plate (D)
via the hook and closed hole on the motor assembly(C). This
will allow for handsfree wiring.Connect the wires according
to the wiring diagram provided below.
Connect the ground wire(Green or bare wire) from the
□
ceiling to the Green/Yellow wire from the motor assembly(C).
Connect the black (hot) wire from the ceiling to the black
□
wire from the motor assembly(C)
Connect the white (neutral) wire from the ceiling to the
□
white wire from the motor assembly(C)
□ Secure the wire connection with a plastic wire nut
provided with the electrical hardware.
□ After connecting the wires,carefully tuck the wire
connections up into the mounting plate (D).
.
.
(FF
)
D
Green or
bare wire
Black
Black
FF (x3)
C
F