Table of Contents
Advertisement
Table of Contents
Table of Contents ..........................................................2
Safety Information .........................................................2
Warranty .........................................................................3
Pre-installation .............................................................. 3
Installation .....................................................................
Safety Information
READ AND SAVE THESE INSTRUCTIONS.
1.
To reduce the risk of electric shock, ensure electricity has
been turned off at the circuit breaker or fuse box before you
begin.
2.
All wiring must be in accordance with the National Electrical
Code "ANSI/NFPA 70" and local electrical codes.
Electrical installation should be performed by a qualified
licensed electrician.
3.
The outlet box and support structure must be securely
mounted and capable of reliably supporting a minimum of 35
lbs (15.9 kg). Use only UL Listed outlet boxes marked
"Acceptable for Fan Support of 35 lbs. (15.9 kg) or less."
4.
Do not place objects in the path of the blades.
5.
Do not use water or detergents when cleaning the fan or fan
blades. A dry dust cloth or lightly dampened cloth will be
suitable for most cleaning.
6.
After making electrical connections, spliced conductors
should be turned upward and pushed carefully up into the
outlet box. The wires should be spread apart with the
grounded conductor and the equipment-grounding conductor
on one side of the outlet box and ungrounded conductor on
the other side of the outlet box.
7.
All setscrews must be checked and retightened where
necessary before installation.
Assembly ....................................................................... 7
......................................................................
6
WARNING:To reduce the risk of electrical shock or fire,
not use this fan with any solid-state fan speed control
device. It will permanently damage the electronic
circuitry.
WARNING:To reduce the risk of personal injury, do not
bend the blade brackets when installing the brackets
balancing the blades, or cleaning the fan. Do not insert
foreign objects in between rotating fan blades.
WARNING:
or personal injury, mount to outlet box marked
" acceptable for fan support of 35 lbs. (15.9Kg)
or less" and use screws provided with the outlet box.
WARNING:
turn the electricity off at the main fuse box before
wiring.
CAUTION: To reduce the risk of personal injury,
use only the screws provided with the outlet box.
CAUTION:
and other items, use caution when working around or
cleaning the fan.
CAUTION:
of 7 ft (2.1 m) clearance from the trailing edge of the
blades to the floor.
CAUTION:
approved by the party responsible for compliance could
void the user's authority to operate the equipment.
WARNING: To reduce the risk of electrical shock, this
must be installed with an lsolating wall control/switch.
2
.......................................................
...........................................................
............................................................
To reduce the risk of fire, electric shock
To avoid possible electrical shock,
To avoid personal injury or damage to the fan
The fan must be mounted with a minimum
Changes or modifications not expressly
10
12
13
14
Advertisement
Table of Contents
