Table of Contents
Advertisement
Home Connect
16 Home Connect
This appliance is network-capable.
Home Connect
Connecting your appliance to a mo-
bile device lets you control its func-
tions via the Home Connect app, ad-
just its basic settings and monitor its
operating status.
Note: You can find further information
in the digital instruction manual by
scanning the QR code in the table of
contents or on www.bosch-
home.com.
The Home Connect services are not
available in every country. The avail-
ability of the Home Connect function
depends on the availability of
Home Connect services in your coun-
try. You can find information about
this at: www.home-connect.com.
¡ → "Connecting the appliance to a
WLAN home network (Wi-Fi) with
WPS function", Page 35
¡ → "Connecting the appliance to a
WLAN home network (Wi-Fi)
without WPS function", Page 36
The Home Connect app guides you
through the entire login process. Fol-
low the instructions in the Home Con-
nect app to configure the settings.
Tips
¡ Please consult the documents sup-
plied by Home Connect.
¡ Please also follow the instructions
in the Home Connect app.
Notes
¡ Please note the safety precautions
in this instruction manual and
make sure that they are also ob-
served when operating the appli-
ance via the Home Connect app.
→ "Safety", Page 4
¡ Operating the appliance on the ap-
pliance itself always takes priority.
During this time it is not possible
to operate the appliance using the
Home Connect app.
16.1 Connecting the appli-
ance to a WLAN home
network (Wi-Fi) with
WPS function
Requirements
¡ Your router has a WPS function.
¡ Wi-Fi is activated on the router.
¡ The Wi-Fi basic setting is activated
on the appliance.
→ "Activating Wi-Fi on the appli-
ance", Page 37
¡ The appliance receives signals
from the WLAN home network (Wi-
Fi) at its installation location.
¡ The Home Connect app is installed
on your mobile device.
Press and hold
1.
3 seconds.
a The display shows "Aut".
Press
.
2.
Press the WPS button on the
3.
router within the next 2 minutes.
Take note of the information in the
documents for your router.
flashes on the display.
a
a The device connects to the Wi-Fi
home network.
a If the display shows "con" and
lights up permanently, the appli-
ance is connected to the Wi-Fi
home network.
If the appliance is not connected
4.
to the Wi-Fi home network, the dis-
play shows "Err" .
Check whether the appliance is
‒
within the range of the Wi-Fi
home network.
Home Connect en
for at least
35
Advertisement
Table of Contents
