Table of Contents
Advertisement
ENGLISH
FACIAL CLEANSING BRUSH
Attachments
Facial Cleansing Brush
1. Moisten the brush bristles by running under water. NOTE: DO NOT use the brush head
whilst completely dry as this can cause skin irritation.
2. Dampen your skin with water and apply face wash onto your skin. Alternatively, apply
your face wash directly onto the brush.
3. We recommend cleansing with the Facial Cleansing brush in 3 sections:
•
T-Zone (1), Right side (2) and Left side (3).
4. Switch on using the On/Off button.
5. Place the facial brush directly onto your skin.
6. Gently glide the brush over the skin and beard in circular motions avoiding the delicate
eye area.
NOTE: Try to avoid applying too much pressure with the brush when directly on the skin.
CARE FOR YOUR GROOMER
Care for your product to ensure a long lasting performance. We recommend that you clean
your groomer after each use.
AFTER EACH USE
•
Brush any accumulated hairs from the groomer and attachment heads.
•
The easiest and most hygienic way to clean the groomer is by detaching the head from
the groomer body and rinsing the head with warm water.
•
Place one or two drops of cutter oil or sewing machine oil on the blades.
•
Turn the device on to distribute the oil evenly, wipe off any excess oil.
BATTERY REMOVAL
We strongly recommend that a professional removes the rechargeable battery. Parts of
the shaver case, and tools have sharp edges and may cause injury if not handled correctly.
•
The rechargeable battery must be removed from the appliance before it is scrapped.
1. Ensure the trimmer is discharged of all power. To do this, operate the device until it
stops.
2. Remove any attachments.
3. Pry off the switch button/switch cover.
4. Unscrew the 2 screws under the cover then remove the lower housing.
5. Slide out the battery assembly.
6. Unscrew the 2 screws from the cover then remove the battery.
8
Advertisement
Table of Contents
