BIKE ASSEMBLY
STEP 2
1.
Make sure the height is between the maximum and
minimum markers as shown.
2.
Once you make sure the seat is straight, tighten the bolt
with the multi tool.
STEP 3
Loosen the break cable nut using the multi-tool provided.
INSERTING THE SEAT
ATTACHING THE FRONT WHEEL
- 13 -
When assembling the seat post, make sure the
saddle is inserted beyond the minimum insert
mark. Failure to observe this warning may lead to a
potentially unstable seat post which may result in
an injury.
Loosen the outer wheel nuts all the way to the edge of
the thread. Insert the wheel and make sure the retention
washer and the nut are on the outside of the wheel fork.