Table of Contents
Advertisement
SPARE PARTS
Appropriate spares include tyres, tubes and brake friction components. Please only use genuine replacement
parts for safety critical components. For further information on the availability of spare parts, please return to any
To make sure your bike is safe and operating correctly, you should perform
•
Ensure the seat is secure
Try moving the seat side to side while standing next to the bike. You should retighten the seat clamp bolts or the seat
post bolts if the seat moves.
•
Ensure the Front and Rear Tyres are Inflated as Per the Requirements
Apply pressure to the sides of the front and rear tyres. They may need to be inflated if they are soft. Re-inflate to the
pressure indicated on the sides of the tyres using an approved bike pump.
•
Ensure that the Pedals are Tight
Make sure both pedals are securely tightened with the supplied multi-tool. Remember that the left and right pedals
have threaded shafts that tighten in different directions.
•
Ensure that the Brakes are functional
Apply the front brake and push the bike forward while standing next to it. If the wheels move, the front brake may not
be working properly. If necessary, adjust the front brakes as described in the manual. Repeat this for the rear brake.
•
Ensure that the Handlebar do not move
Try to move the handlebar while holding the front wheel between your legs. The stem bolt may have gotten loose if the
handlebar move. Replace the stem bolt and tighten it.
•
Ensure that the bike is clean and lubricated
To ensure proper operation, the bike should be cleaned and re-oiled on a regular basis.
of our stores or contact our customer service team via the below:
the following checks before riding it.
Front Wheel Axle Nut
Rear Wheel Axle Nut
- 10 -
Advertisement
Table of Contents
