SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD
Starting up
Before starting up, Please check the input voltage to the rated input voltage, grounding is good.
The product adopts independent 220 VAC power supply.
Equipment Powered Instructions
Special Note:
1. The power module must be properly inserted in the device, so it can be supplied power.
2. Do not insert the charged power module into the device directly.
LED/ Key Description
key : Upper button. Press this button can check each parameter of products from
bottom to top.
key : Down button. Press this button can check each parameter of products from top to
bottom.
key : Menu button. Press it can enter the menu.
key : Return button. Press it can return to the standby screen。
Display Menu Description
(1)Display device start up process when power on:
(2) Press the Menu button to display products model:
MODEL : EDFA 1550
(3)Press the down button to display internal temperature:
INTERNAL TEMP
(4)Press the down button to display the current of pump 1:
LD1
(5)Press the down key to display the cooling current of pump 1:
TEC1
(6)Press the down button to display the current of pump 2:
LD2
Website: www.baudcom.com.cn
High Power Amplifier
**℃
CURRENT
***MA
CURRENT
***MA
CURRENT
*.* A
Tel: +86 21 37709251
Email: info@baudcom.com.cn