Emerson ES30 Owner's Manual page 28

7.) To begin programmed playback press the
The display will show the first
p r o g r a m m e d t r a c k a n d
playback will begin on that
track. The MEMORY Indicator stops flashing and remains in the display.
After the last programmed track has played the player stops but the programmed
tracks remain in the memory.
To play the programmed tracks again, press the MEMORY button and then the
PLAY/PAUSE button.
To cancel the programmed sequence from memory, press the
button at programming mode or open the CD door.
Program Repeat Playback
You can use the Program and Repeat features together to continuously repeat a
programmed sequence of tracks.
First, program the desired tracks according to Steps 1 through 7 on the previous
page.
When Programmed Playback begins press the REPEAT/M-UP button twice to
activate the All Tracks Repeat feature.
The REPEAT Indicator appears
in LCD display and all the tracks
in your programmed sequence
will be repeated continuously.
To cancel Programmed Repeat Playback press the
both the MEMORY and REPEAT Indicators go ' Off' .
ES30_072905.p65
27
27
PLAY/PAUSE button.
STOP/BAND
STOP/BAND button until
29/7/2005, 16:41