Related Manuals for Tecnoclima DST Series
Summary of Contents for Tecnoclima DST Series
- Page 1 DESTRATIFYER DST series TECHNICAL INFORMATION, ASSEMBLY INSTRUCTIONS, USE AND MAINTENANCE...
-
Page 2: Compliance Notices
DST 85 GUARANTEE The destratifyers DST series are covered by a SPECIFIC GUARANTEE that starts on the date of purchase of the device, which date the buyer should document; if he cannot do this, the guarantee starts on the date of manufacture of the device. - Page 3 INDEX Compliance notices pag. 2 Range pag. 2 Garantee pag. 2 Index pag. 3 General notes pag. 4 Safety rules pag. 5 Description of equipment pag. 5 Receipt of the product pag. 5 Handling and transport pag. 6 Structure pag. 6 Identification pag.
-
Page 4: General Notes
GENERAL NOTES This Instruction Manual is an integral part of the device and as such must always be kept with the device, also when the heater is sold to another user. The Manual must therefore be conserved carefully and consulted attentively before any action. -
Page 5: Safety Rules
SAFETY RULES Children ad unassisted disabled persons must not use the appliance. Do not touch the appliance if you are barefoot or if parts of your body are wet. Do not carry out any cleaning or maintenance operation without first deactivating the heater by setting the main system switch to "OFF"... -
Page 6: Handling And Transport
HANDLING AND TRANSPORT The moving should be carried out by expert personnel and with correct instruments. Destratyfier is supplied protected by a cardboard wrapping and it must be handled respecting the direction of the indicator on the packaging. WARNING! The handling and transport should be carried out in safety, avoiding damages and dangers for individuals. During the transport do not stop near the appliance. -
Page 7: Dimension And Weight
IDENTIFICATION The destratifyers can be indentified through: Technical Data Sheet with the most important technical and performance data on the appliance. En case of damage or lost, ask for a copy to the authorized After Sales Service. DIMENSION AND WEIGHT TYPE NET WEIGHT TECHNICAL DATA... -
Page 8: Installation Height
NOTES ON FUNCTIONING To solve stratification problems, it is necessary to create a constant mix of warm air, that usually is located in the upper part of the environment, and cold air, that is located at ground level, in order to keep temperatures, humidity and pressure uniform and to reduce to a minimum the heat dispersion. - Page 9 Example of dimensioning: mounting height (9 x 2) / 3 = 6 volume overhanging zone (18 x 40 x 3) / 2 1.080 m³ volume to recirculate 1.080 x 6 = 6.480 6.480 m³/h ...
- Page 10 Examples of location: IN SMALL ENVIRONMENTS IN ASYMMETRIC ENVIRONMENTS IN MEDIUM ENVIRONMENTS...
-
Page 11: Electrical Connections
SUSPENSION The destratifyer is preset for suspension with special ringbolts. The installer has to verify: The correct dimensioning of the anchoring system in the respect of the weight indicated in the chapter TECHNICAL DATA. The correct dimensioning of the pulling cables in the respect of the weight indicated in the TECHNICAL DATA. - Page 12 ADJUSTMENT OF FINS The diffuser is equipped with a series of fins single individually adjustable to better adapt the flow to the different geometries of the installation. The installer must do the regulation, considering the following parameters: Never close the fins completely. ...
- Page 13 ADJUSTMENT OF CONTROL THERMOSTAT The thermostat of the appliance has to control automatically and independently every single unit. Once the temperature arranged on the thermostat disc is obtained, the fan starts, and when the temperature goes under this value, the fan stop. In this way we are sure that the destratifyer works only when the temperature next to the appliance is high, and it prevents that fresh air goes to the ground.
- Page 14 WIRING DIAGRAM TYPE 1 TK TK W2 U1 U2 V1 V2 W1 TK TK W2 U1 U2 V1 V2 W1 TK TK W2 U1 U2 V1 V2 W1 L1 L2 L3 N L1 L2 L3 ALIMENTATION ALIMENTATION ALIMENTATION ELETTRICAL ELETTRICAL ELETTRICAL MONOPHASE TRIPHASE...
- Page 15 WIRING DIAGRAM TYPE 2 L1 L2 L3 L1 L2 L3 L1 L2 L3 N L1 L2 L3 ALIMENTATION ALIMENTATION ALIMENTATION ELETTRICAL ELETTRICAL ELETTRICAL MONOPHASE TRIPHASE TRIPHASE SUPPLY SUPPLY SUPPLY 230V - 50Hz 400V - 50Hz 3N 230V - 50Hz 230V – 50Hz 230V –...
-
Page 16: Initial Start-Up
PREPARATION TO INITIAL START-UP Before starting-up and testing the appliance, check that: The appliance is in the correct position; Electrical connections are correct and the fan turn in the correct sense of rotation; The electrical voltage is correct and compatible to the appliance arrangement; ... -
Page 17: Maintenance
MAINTENANCE The periodic maintenance is very important for the safety, the performance and the duration of the appliance. Before starting the maintenance operations: Take off the electrical supply by putting the switch o installation on “off”; COTROL OF ELECTRIC VOLTAGE With a voltmeter check that the supply voltage is the one indicated on the technical data sheet with tolerance ±... - Page 18 NOTES...
- Page 20 38057 Pergine Valsugana (TRENTO) ITALY Viale dell’Industria, 19 Tel. 0461/531676 - Fax 0461/512432 tecnoclima@tecnoclimaspa.com www.tecnoclimaspa.com 02/15_Rev.03 704-GB-MN...
Need help?
Do you have a question about the DST Series and is the answer not in the manual?
Questions and answers