PROLUMIA 41060630 Operating Instruction page 13

When ambient light is higher than the set
threshold, the lamp doesn't switch on.
PIR SENSOR - DETECTION PATTERN
(Unit: m)
Press
When ambient light is lower than the set
threshold, the sensor switches on the lamp
when motion is detected.
Disable the daylight sensor.
Motion detection function was disabled.
2.5m
0
Wall mounting detection pattern (Unit: m)
Suggested installation height: 2.5m
www.prolumia.com
After hold time, the sensor switches off the
lamp when no motion is detected.
6.8m (max.)
Press
13