Table of Contents
Advertisement
IPTV EPG-Server
5 Installation & Easy Setup
5.1 Installation
5.1.1 Static IP address
A static address must be used on the computer you use to configure the headend. Refer to the computer's operating
software documentation for assistance on using static IP addresses.
5.1.2 Connecting to the EPG Server
Connect IPTV EPG Server to power. Using a computer on the same local network, type in the Server IP (default:
http://192.168.0.200) into a browser to access the EPG Server Web Interface.
Enter user name and password (default "admin" and "Triax1234") and press Enter.
Note:
The computer must have access to the same IP Subnet as the Server.
5.2 TDX Setup
Before getting started, make sure the headend is setup with a unique TSID and ONID and each channel has a unique
SID.
Setup the headend to deliver an IP Barker channel (a transport stream containing only information about upcoming
programs, thereby reducing the bandwidth required for the transport streams carrying the audio/video information)
in order to provide the IPTV EPG Server with a transport stream of EPG data.
Note:
For information on how to set up an IP Barker channel, please refer to the "IP Output Configurations – EIT Barker
channel" chapter of the TDX Headend System Main Unit User manual.
Take special note of the multicast IP address for the Barker channel, as this is needed for the rest of the setup
procedure.
EN
8
Advertisement
Table of Contents
