Settings; Device Settings; Server Settings - Triax IPTV EPG Server User Manual

IPTV EPG-Server

5.4 SETTINGS

5.4.1 Device Settings

The Settings link takes you to the settings menu.
The Settings menu contains the static IP settings for the IPTV EPG Server and the Server Settings for listening to the
Barker channel.
The IPTV EPG Server IP can be changed to a different subnet (e.g. the same as the TDX Service port). You can do so by
changing it under "IP Settings". It is not a necessary for the IPTV EPG Server to be on the same subnet as the TDX
AUX port, they simply need to be connected to the same switch.

5.4.2 Server Settings

Enter the Barker channel IP you entered when setting up the TDX here.
You should now be able to access the EPG data in the selected XML format from your middleware solution.
Note:
To check the setup, you could enter the server address, followed by the path to see the raw xml file, e.g.
http://192.168.0.200/xmlTvEvents.
Special note on Samsung SINC Server: Samsung Language Priority is a setting used for the Samsung SINC server
system. Because the Samsung format is only designed for 1 language, the server will use the topmost language in this
list that is available in the Barker stream. If the server has detected a new language that has not been prioritized yet,
it will be printed in red until the changes are applied.
EN 10