Emerson MS3110 Owner's Manual page 12

Active Subwoofer Output Jack
This system includes an output jack for the connection of an optional active/powered
subwoofer. The subwoofer must have its own power supply and AC power cord.
You cannot use a passive/un-powered subwoofer.
Connect your active subwoofer to the SUB-WOOFER output jack on the back
panel of this system. Connect the subwoofers AC power cord to your AC outlet,
set the subwoofer power switch ' On' and adjust the subwoofers level control to the
desired setting.
When you operate this system the low frequencies will be sent to the external
powered subwoofer for a more powerful bass sound.
Note: the remote controller of this system cannot control the external
subwoofer. You must remember to switch the external subwoofer ' On' and
' Off' , and adjust the subwoofer output manually.
To Optional Subwoofer Amplifier
Subwoofer Out
11
MS3110_112106.p65 11 22/11/2006, 11:48