Resume Program At Rinse Hold; Taking Out The Laundry; Switching Off The Appliance; Child Lock - Siemens WG56G2MAFG User Manual And Installation Instructions

Table of Contents

Advertisement

NL Child lock
– Start the program at a high water
level Centrifuge / Essorage or
select a suitable program for
draining.
→ "Programs", Page 26
Remove the laundry
3.
→ Page 34 .
13.12 Resume program at
rinse hold
The program Centrifuge / Essorage
1.
or select a suitable program for
draining.
→ "Programs", Page 26
Press Start/Pause.
2.
13.13 Take out the laundry
Open the appliance door.
1.
Remove the laundry.
2.
13.14 Switching off the device
Set the program selector to .
1.
Close the water tap.
2.
Wipe the rubber sleeve dry and
3.
remove any foreign objects.
Leave the appliance door and detergent
4.
drawer open to allow the residual
water to dry out.
34

14 Child Lock

Secure your device against unwanted
operation via the controls.

14.1 Activating child lock

Press both buttons 3s for approx.
3 seconds.
a The display shows
to give.
a The controls are
blocked.
a The childproof lock remains in effect even after the
device switching is activated.
14.2 Deactivate child lock
Required: To deactivate the child lock,
the appliance must be switched on.
Press both buttons 3s for about 3
seconds.
a goes out in the display

15 Basic Settings

You can set up your device according to
your needs.
Remark: More information can be
found in the digital operating
instructions by scanning the QR code
in the table of contents or at
www.siemens-home.bsh-group.com .
reflected
.

Advertisement

Table of Contents
loading

Table of Contents