Table of Contents
Advertisement
Installation as a Built-In
These cut out dimensions show the minimum space required for your appliance to
perform as designed.
Reversing the Door Swing
Before you begin: Tape down shelves to avoid movement during the
process.
The door of this appliance can be hung to open on the left or right side. To
reverse the door swing of your cooler and open from the opposite side, please
follow the instructions and diagram below.
1. Put the cabinet on open area, with the door opened to the maximum
2. Use small knife to take off the decorative covers (1) on opposite side (Drawing 1);
3. Use the six angle screwdriver (Tool 5) to disassemble the screws (4) of door
support (3), then remove the door support. (Drawing 1)
4. Hold the door, use six angle screwdriver (Tool 5) to unscrew the door shaft core (6)
from the two ends of the top of the door. Take out the door and set aside. (Drawing
2)
5. Discharge the upper and lower door hinge(7&8) by M5 inner six angle screwdriver
(Tool 5) , then to assemble the door hinge on the opposite side. (Drawing 3 and 4)
8
Advertisement
Table of Contents
