Troubleshooting - Wine Enthusiast 261 02 58 03 User Manual

Beverage cooler
Table of Contents

Advertisement

Power Interruptions
• Occasionally there may be power interruptions due to thunderstorms or other
causes. Remove the power cord from AC outlet when a power outage occurs.
When power has been restored, wait 3 to 5 minutes then re-plug the power cord
to AC outlet.
Vacation and Moving Care
• For long vacations or absences, unplug the appliance and clean the appliance and
door gaskets according to "General cleaning" section. Leave doors open, so air
can circulate inside.
• Always move the appliance vertically. Do not move with the unit lying down, as
possible damage to the sealed system could occur. Note: After moving, wait for
24 hours before plugging in the appliance.

Troubleshooting

Many common issues with your appliance can be easily solved. Try the
troubleshooting tips below if you experience any problems.
Appliance Does Not Operate:
• Check if appliance is plugged in.
• Check if there is power in the AC outlet, by checking the circuit breaker.
Beverage appears too warm:
• Frequent door openings.
• Allow time for recently added wine to reach desired temperature.
• Check gaskets for proper seal.
• Clean condenser coils.
• Adjust temperature control to colder setting
15

Advertisement

Table of Contents
loading

This manual is also suitable for:

261 02 58 04

Table of Contents