Table of Contents
Advertisement
Adhesive device
Take the appropriate amount of 3M adhesive, attach it to the back of the
sensor, remove the protective film of the 3M adhesive, and install the
device to the specified position.
6.3. Cable Ties
6.3.1.Auxiliary material
No.
Materials
1
Metal cable ties（5*300mm)
2
Slotted screwdriver, utility knife
Open the device case
6.3.2.Installation instructions
Use a slotted screwdriver to open the top cover from the bottom edge.
9
OPZ1ZT92
power socket
Quantity
2
Advertisement
Table of Contents
