6. Installation
There are three installation methods: Screw, 3M Adhesive and cable ties.
6.1. Screw
6.1.1.Auxiliary material
No.
Materials
1
self tapping screw (M3*20)
2
#4 expanded plastic pipe
3
Percussion drill,#4 drill bit,hammer
4
slotted screwdriver, cross screwdriver
Open the device case
6.1.2.Installation instructions
Use a slotted screwdriver to open the top cover from the bottom edge.
Punching
Place the device in the mounting position, punch and insert the expanded
plastic pipe.
Fixation
6
OPZ1ZT92
Quantity
2/device
2
1
1
opening