Cleaning - Custom Audio Electronics SCANNER A6 User Manual

6.2 Cleaning

The regular cleaning of the device keeps the scan quality and extends its life. The device does not provide a pre-established
cleaning schedule. Proceed with cleaning operations when image acquisition is inaccurate.
For cleaning the device, see the instructions below:
Sensors
1
Disconnect the power supply cable and
Disconnect the power supply cable and
open the device cover (see open the device cover (see paragraph 4.1).
2
ATTENTION:
Do not use alcohol, solvents, or hard brushes.
Do not let water or other liquids get inside the machine.
To remove paper scraps, use tweezers or compressed air.
ON
Clean the device sensors
by using compressed air.
paragraph 5.1).
Alcohol, solvent
Paper path
1
Disconnect the power supply cable and
Disconnect the power supply cable and
open the device cover (see open the device cover (see paragraph 4.1).
2
ATTENTION:
Do not use alcohol, solvents, or hard brushes.
Do not let water or other liquids get inside the machine.
To remove paper scraps, use tweezers or compressed air.
ON
Clean, from the inside out, the area involved in the
passage of paper by using compressed air.
paragraph 5.1).
Alcohol, solvent
35