Start-Up And Temperature Control - Electrolux Icon 242000100 Use & Care Manual

Start-Up and Temperature Control

Starting the Appliance
Your refrigerator drawers appliance is shipped in the ON position; however, you may turn it ON or OFF by
pressing and holding the ON/OFF for three (3) seconds and then releasing the key.
Adjusting the Temperature
To accurately check the temperature, insert a reliable thermometer into a
plastic (non-breakable) bottle, partially filled with water. Tighten the bottle
cap securely.
Place the bottle in the desired area for 24 hours. Refrain from opening the
appliance during the testing period. After 24 hours, check the temperature
of the water.
Press and release the (+) or (–) indicator to adjust the temperature to the
desired setting. The temperature display will begin to blink with the first
touch and release. Adjust the temperature by touching and releasing the
key. After three (3) seconds of inactivity, the display will beep to accept
the new temperature.
Factors that affect the internal temperatures of the cabinet include:
1 Temperature setting
2 Room temperature where installed
3 Number of times the door is opened and closed
4 Amount of time the internal light is illuminated
5 Installation in direct sunlight or near a heat source which we do not recommend.
7