Before Operating; To Set The Clock; Stop/Clear - Electrolux TINSEB491MRR0 Use And Care Manual

Electrolux microwave oven user manual
Table of Contents

Advertisement

Before operating your new Microwave Oven make
sure you read and understand this Use and Care
Guide completely.
Before the Microwave Oven can be used, follow
these procedures:
1.
Plug in the oven. Close the door. The oven display
will show ENJOY YOUR OVEN TOUCH CLEAR
AND TOUCH CLOCK.
sTOP/CLEAR pad. : will appear.
2.
Touch the
3.
Set clock. See below.

To set the clock

• Suppose you want to enter the correct time of
day 12:30 (A.M. or P.M.).
Procedure
Step
1.
Touch
set clock.
2.
Enter the correct time of
day by touching the
numbers in sequence.
3.
Touch
set clock again.
This is a 12 hour clock. If you attempt to enter an
incorrect clock time, ERROR will appear in the
display. Touch the sTOP/CLEAR pad and re-enter
the time.
• If the electrical power supply to your microwave
oven should be interrupted, the display will
intermittently show ENJOY YOUR OVEN TOUCH
CLEAR AND TOUCH CLOCK after the power
is reinstated. If this occurs during cooking, the
program will be erased. The time of day will also
be erased. Simply touch sTOP/CLEAR pad and
reset the clock for the correct time of day.
Your Microwave Oven can be programmed with
the door open except for sTART, popcorn, fresh
veggies, frozen veggies, baked potato and
Touch
sensor reheat.

stop/Clear

Touch the sTOP/CLEAR to:
1
2
1.
Erase if you make a mistake during programming.
2.
Cancel timer.
3
0
3.
Stop the oven temporarily during cooking.
4.
Return the time of day to the display.
5.
Cancel a program during cooking, touch twice.

Before Operating

NOTE
11
E

Advertisement

Table of Contents
loading

Table of Contents