Download
Share
Print this page
Eizo ColorEdge CG19 User Manual
  1. Manuals
  2. Brands
  3. Eizo Manuals
  4. Monitor
  5. ColorEdge CG19
  6. User manual
Eizo ColorEdge CG19 User Manual

Eizo ColorEdge CG19 User Manual

Calibration color lcd monitor
Hide thumbs Also See for ColorEdge CG19:

Advertisement

Quick Links

Download this manual
SAFETY SYMBOLS
PRECAUTIONS
1. INTRODUCTION
1-1.Features
1-2.Package Contents
1-3.Controls & Connectors
2. CABLE CONNECTION
2-1.Before Connecting
2-2.Connecting the Signal
Cable (D-Sub or DVI)
2-3.Connecting the Signal
Cable (ADC)
2-4.Connecting Two PCs to
the Monitor
2-5.How to remove the Tilt
Stand
3. ScreenManager
3-1.How to use the
ScreenManager
3-2.ScreenManager
Adjustments and Settings
3-3.FineContrast
3-4.Useful Functions
4. ADJUSTMENT
4-1.Screen Adjustment
4-2.Displaying a low
resolution
4-3.Color Adjustment
4-4.Power-save Setup
5. MAKING USE OF USB
(Universal Serial Bus)
6. TROUBLESHOOTING
7. CLEANING
This manual is checked under the browser settings shown
below. Text size can change for another one through
browser setting.
Microsoft Internet Exproler:
Text size: Medium
Encoding: Western European

Advertisement

loading
Need help?

Need help?

Do you have a question about the ColorEdge CG19 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Eizo ColorEdge CG19

Summary of Contents for Eizo ColorEdge CG19

  • Page 1 SAFETY SYMBOLS PRECAUTIONS 1. INTRODUCTION 1-1.Features 1-2.Package Contents 1-3.Controls & Connectors 2. CABLE CONNECTION 2-1.Before Connecting 2-2.Connecting the Signal Cable (D-Sub or DVI) 2-3.Connecting the Signal Cable (ADC) 2-4.Connecting Two PCs to the Monitor 2-5.How to remove the Tilt Stand 3.

  • Page 2: Specification

    8. SPECIFICATION 9. GLOSSARY APPENDIX/ ANHANG/ ANNEXE About TCO'03 (Applicable to gray) About TCO'99 (Applicable to black) FCC Declaration of Conformity Hinweis zur Ergonomie / Recycle Auskunft / Hinweise zur Auswahl des richtigen Schwenkarms für Ihren Monitor...
  • Page 3 EIZO NANAO CORPORATION. EIZO NANAO CORPORATION is under no obligation to hold any submitted material or information confidential unless prior arrangements are made pursuant to EIZO NANAO...
  • Page 4 ScreenManager, ColorEdge and EIZO are registered trademarks of EIZO NANAO CORPORATION in Japan and other countries. As an ENERGY STAR determined that this product meets the ENERGY STAR guidelines for energy efficiency. ® Partner, EIZO NANAO CORPORATION has...
  • Page 5 IMPORTANT! This product has been adjusted specifically for use in the region to which it was originally shipped. If operated outside the region to which it was originally shipped, the product may not perform as stated in the specifications. To ensure personal safety and proper maintenance, please read this section and the caution statements on the unit (refer to the figure below).
  • Page 6 Refer all servicing to qualified service personnel. Do not attempt to service this product yourself as opening or removing covers may result in fire, electric shock, or equipment damage. Keep small objects or liquids away from the unit. Small objects accidentally falling through the ventilation slots into the cabinet or spillage into the cabinet may result in fire, electric shock, or equipment damage.
  • Page 7 To avoid danger of suffocation, keep the plastic packing bags away from babies and children. Use the enclosed power cord and connect to the standard power outlet of your country. Be sure to remain within the rated voltage of the power cord. Not doing so may result in fire or electric shock.
  • Page 8 Never touch the plug and power cord if it begins to thunder. Touching them may result in electric shock. When attaching an arm stand, please refer to the user's manual of the arm stand and install the unit securely with the enclosed screws. Not doing so may cause the unit to become unattached, which may result in injury or equipment damage.
  • Page 9 Cleaning the unit while it is plugged into a power outlet may result in electric shock. If you plan to leave the unit unused for an extended period, disconnect the power cord from the wall sochekt after turning off the power switch for the safety and the power conservation.
  • Page 10 In order to suppress the luminosity change by long-term use and to maintain the stable luminosity, use of a monitor in lower brightness is recommended. The screen may have defective pixels. These pixels may appear as slightly light or dark area on the screen. This is due to the characteristics of the panel itself, and not the product.
  • Page 11 Thank you very much for choosing an EIZO Color Monitor The exclusive use calibration software caliblates the monitor characteristics and generate colorprofile. Dual inputs compliant Digital input (TMDS) compliant. ADC (Apple Display Connector) inputs compliant. [Horizontal scanning frequency] Analog: 30 - 82 kHz...
  • Page 12 * LCD Monitor * Power Cord * Signal Cable (FD-C35/FD-C39) * Signal Cable (FD-C16) * EIZO USB Cable (MD-C93) * EIZO LCD Utility Disk * Please retain the packing materials for future transference. Front * User's Manual (in the CD-ROM) * Calibration software "ColorNavigator"...
  • Page 13 ® (1) ScreenManager (2) Main Power Switch (3) Input Signal Selection Button (4) Mode Button (5) Auto Adjustment Button (6) Enter Button (7) Control Buttons (Up, Down, Left, Right) (8) Power Button (9) Power Indicator Blue Yellow Flashing yellow (2 times for each) Flashing yellow slowly Pressing the Mode button once allows you to display a FineContrast menu.
  • Page 14 (10) Height Adjustable Stand (Detachable) (11) Security Lock Slot (12) DVI-I Input Connector (SIGNAL 1, SIGNAL 2) (13) USB Port (1 Upstream) (14) USB Port (2 Downstream) (15) Power Connector *4 The LCD monitor has the capability of the Portrait/Landscape display. (The panel pivots in the clockwise direction 90°.) The LCD monitor can be used with an optional arm stand by removing the stand.
  • Page 15 Before connecting your monitor to the PC, change the display screen settings (resolution and frequency) in accordance with the charts below. * When your computer and display support VESA DDC, the suitable resolution and the refresh rate are set by just plugging your display into the computer without any manual settings.
  • Page 16 Digital Input The monitor supports the following resolutions only. Resolution Frequency 640 x 480 60 Hz 720 x 400 70 Hz 720 x 480 60 Hz 800 x 600 60 Hz 1024 x 768 60 Hz 1280 x 1024 60 Hz * Be sure that the power switches of both the PC and the monitor are OFF.
  • Page 17 Signal Cable Signal Cable (FD-C16 enclosed) Signal Cable (FD-C16 enclosed) + Macintosh Adapter (Optional) Digital Input Signal Cable Signal Cable (FD-C35/FD- C39 enclosed) 2.Plug the power cord into the power connector on the rear of the monitor. 3.Lead the power cord and signal cable into the cable holder at rear of the monitor.
  • Page 18 * The cables are recommended to lead with slight sag for the smooth motion of the stand and the Portrait/Landscape display. 4.Plug the other end of the power cord into a power outlet. The monitor's power indicator will flash yellow slowly. WARNING Use the enclosed power cord and connect to the standard power outlet of your country.
  • Page 19 5.Turn on the monitor's power button and then switch on the PC's power. The monitor's power indicator will light up (blue). If an image does not appear, refer to the Whenever finished, turn off the PC and the monitor. * When turning on the monitor, the kid of the input signal (Signal1 or 2/Analog or Digital) is displayed for a few seconds on the right top corner of the screen.
  • Page 20 Signal Cable Signal Cable (FD-C35/FD- C39 enclosed) +ADC-DVI display adapter (commercially available) * ADC-DVI display adapter is required if the monitor connects to Power Mac G4 / G5. The adapter is commercially available. 2.Plug the power cord into the power connector on the rear of the monitor.
  • Page 21 4.Plug the other end of the power cord into a power outlet. The monitor's power indicator will flash yellow slowly. WARNING Use the enclosed power cord and connect to the standard power outlet of your country. Be sure to remain within the rated voltage of the power cord. Not doing so may result in fire or electric shock.
  • Page 22 6.Change the input selection setting of the connector in the Input Selection menu to "ADC". Press Enter button to complete the setting and the menu closes. 7.Switch on the PC's power. The monitor's power indicator will light up (blue). If an image does not appear, refer to the Whenever finished, turn off the PC and the monitor.
  • Page 23 Signal Cable (FD- C35 / FD-C39 enclosed) +ADC- DVI display adapter (commercially (EX.1) Digital ADC available) Signal Cable (FD- C35 / FD-C39 enclosed) +ADC- DVI display adapter (commercially (EX.2) Digital ADC available) Signal Cable (FD- C35 / FD-C39 enclosed) (EX.3) Digital DVI-D Signal Cable (FD- C35 / FD-C39 enclosed)
  • Page 24 "Input Priority" setting (see table below). Once a priority is set, whenever a change of signal is detected at the selected input, the monitor will switch the input to that signal. In this case of only one signal being present at either input, the monitor automatically detects and displays that signal.
  • Page 25 Manual The monitor will not detect signals automatically in this mode. Select the active input by pressing the input signal selection button on the monitor's control panel. * When "1" or "2" is selected, the power saving mode of the monitor activates only if both PCs are in power saving mode.
  • Page 26 1.Hold the center of the stand mounting cover and slide them rightward or leftward to remove the mounting cover. 2.Lay the LCD monitor down. Do not scratch the panel. 3.Remove the tilt stand by loosening the screws. (4 pcs of M4 x 15 4.Attach an arm stand to the LCD monitor securely.
  • Page 27 ScreenManager allows you to adjust screen performance though the main menu and select a FineContrast mode easily. * Main Menu and FineContrast menu cannot be activated at the same time. 1.Entering the ScreenManager Press the Enter button once to display the main menu of the ScreenManager. 2.Making Adjustments and Settings (1) Select the desired sub menu icon using the Control buttons and press the Enter button.
  • Page 28 3.Exiting the ScreenManager (1) To return to the main menu, select the <Return> icon or press the Down button twice, followed by the Enter button. (2) To exit the ScreenManager, select <Exit> icon or press the Down button twice, followed by the Enter button. * Double clicking the Enter button at any time also exits the ScreenManager menu.
  • Page 29 Reset PowerManager DVI DMPM VESA DPMS Others Screen Size Border Intensity Input Priority Off Timer Beep Menu Settings Orientation Power Indicator Reset Information Information Language English, German, French, Spanish, Italian, Swedish and Japanese *1 The adjustable functions on the <Color> menu depend on the selected FineContrast mode.
  • Page 30 This function allows you to select the best suited mode for screen display. To select the Mode Pressing the Mode button allows you to select the best suited mode for screen display from 3 FineContrast modes; Custom, sRGB and CAL. Color settings each mode can be adjusted by using the <Color>...
  • Page 31 Selecting of the FineContrast mode by the Mode button / Adjustments Unlocked function Input Signal Selection Button [To lock] Switch off the monitor's power by the power button on the front control panel. Press on the Auto Adjustment button while switching on the monitor's power. [To unlock]...

  • Page 32: Off Timer

    Switch off the monitor's power by the power button on the front control panel, then hold Down the Auto Adjustment button once again and turn the power back on. Off Timer The off timer function causes the monitor to automatically enter a power off state after a predetermined amount of time has lapsed.

  • Page 33: Power Indicator Setting

    (2) Select "Disable". EIZO Logo Disappearing Function When switching on the power button on the front control panel, the EIZO logo is displyed for a while. If you desire to display or undisplay this logo, use this function. (Default is logo appearing.)
  • Page 34 (1) Select <Input Signal> in the <Others> menu. (2) Select <Manual>.
  • Page 35 The monitor displays the digital input image correctly based on its pre-setting data. Screen adjustments for the LCD monitor should be used in suppressing screen flickering and also for adjusting the screen to its proper position. There is only one correct position for each display mode.
  • Page 36 Having read the "Readme.txt" file, run the "Screen Adjustment Program" in the enclosed EIZO LCD Utility Disk. Step by step, adjustment is provided by the wizard guide. (If using the Windows, the program can be directly run from the menu screen of the CD-ROM.)
  • Page 37 (2) Horizontal bars appear on the screen. => Use the <Phase> adjustment. Select the <Phase> and eliminate the horizontal flickering, blurring or bars by using the Right and Left buttons. * Horizontal bars may not completely disappear from the screen depending on the (3) The screen position is incorrect.
  • Page 38 (4) Screen image is smaller or larger than the actual screen images. => Use the <Resolution> adjustment. Adjustment is needed when the input signal resolution and the resolution now being displayed are different. Select <Resolution> and confirm if the resolution now being displayed is the same as the input resolution.
  • Page 39 Displays the picture at the actual screen resolution. Example: Displaying 1024 x 768 2.Smooth the blurred texts of the enlarged screen. => Switch the <Smoothing> setting. Select the suitable level 1-5 (Soft-Sharp). Select <Smoothing> in the <Screen> menu and adjust by using the Right and Left buttons.
  • Page 40 * <Smoothing> is disabled when the screen is displayed in the following resolutions. 1280 x 1024 The image size is doubled both in horizontally and vertially to (i.e. 1280 x 960 enlarged from 640 x 480) provide clear focus which does not require this function.
  • Page 41 "*": Settable/Adjustable "-": Fixed at the factory Icons Functions Brightness** Temperature** Gamma** Saturation Gain 6 colors Reset **These settings can be also adjusted on the FineContrast menu. * Allow the LCD monitor to stabilize for at least 20 minutes before making image adjustments.
  • Page 42 The values shown in the Kelvin are available only as a reference tool. Adjusting the <Gain> turns the <Temperature> adjustement "OFF". Setting the temperature under 4,000 K or over 10,000 K invalidates the color temperature setting. (The color temperature's setting turns "OFF".) Gamma To set the gamma value f setting the gamma value, the using the monitor in the...
  • Page 43 The <PowerManager> menu in the ScreenManager enables to set the power-save setup. * Do your part to conserve energy, turn off the monitor when you are finished using it. Disconnecting the monitor from the power supply is recommended to save energy completely. * Even if the monitor is in a power saving mode, USB compliant devices function when they are connected to the monitor's USB (both the Upstream and the Downstream ports).
  • Page 44 Digital Input This monitor complies with the [Procedure] (1) Set the PC's power saving settings. (2) Select "DVI DMPM" from the <PowerManager> menu. [Power saving system] Operation Power saving Off mode *1 Power saving through the PC's off mode is only supported when "Manual" is selected on the ScreenManager's <Input Priority>.
  • Page 45 PC * Windows 98/2000/XP//Mac OS 8.5.1 or later * EIZO USB Cable (MD-C93, enclosed) * The USB hub function may not work properly depending on the PC, OS or peripherals. Please consult the manufacturer of each device about the USB support.
  • Page 46 2.Connect the upstream port of the monitor to the downstream port of the USB compliant PC or another hub by using the USB cable. After connecting the USB cable, the USB function can be set up automatically. 3.After setting up, the monitor's USB hub is available for connecting USB compliant peripherals to the downstream ports of the monitor.
  • Page 47 If a problem persists even after applying the suggested remedies, contact an EIZO dealer. No picture problems : See No.1 ~ No.2 Imaging problems : See No.3 ~ No.14 Other problems : See No.15 ~ No.18 USB problems : See No.19 ~ No.20 Problems 1.
  • Page 48 Whenever an error signal message appears, the signal frequency will be displayed in red. (Example) 3. Display position is incorrect. 4. Screen image is smaller or larger than the actual screen images. 5. Vertical bars of distortion appear. 6. The characters and images have several vertical bars on their right side.
  • Page 49 7. Horizontal bars of distortion appear. 8. Letters and lines appear blurred. 9. Distortion appears like the figure below. 10.The screen is too bright or too dark. 11. Afterimages appear. 12.The screen has defective pixels (e.g. slightly light or dark). 13.Fingerprints remain on the screen.
  • Page 50 [ ] Check that the USB cable is correctly connected. [ ] Check the downstream ports by connecting the peripherals to other downstream ports. If the problem is solved by doing this, contact an EIZO dealer. (For details, refer to the manual of the PC.)
  • Page 51 [ ] Try executing the following method. Restarting the PC - Restarting the PC Connecting the PC and peripherals directly If the problem is solved by doing this, contact an EIZO dealer.
  • Page 52 Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime. * Never use thinner, benzene, alcohol (ethanol, methanol, or isopropyl alcohol), abrasive cleaners, or other strong solvents, as these may cause damage to the cabinet or LCD panel.

  • Page 53: Vesa Ddc 2B

    48 cm (19.0 inch), TFT color LCD panel with Anti-Glare Hard LCD Panel Coating Viewing Angle: H: 170°, V: 170° (CR>10) Dot Pitch 0.294 mm Horizontal Scan Analog: 30 - 82 kHz (Automatic) Frequency Digital: 30 - 65 kHz Analog: 49 - 86 Hz (Automatic) Vertical Scan (1280 x 1024: 49 - 75 Hz) Frequency...
  • Page 54 Communication 480Mbps(high), 12 Mbps (full), 1.5 Mbps (low) speed Downstream 500 mA for each (Max.) power supply USB ports Upstream port x 1, Downstream port x 2 Certifications and NRTL/C-TÜV, FCC-B, TCO'03 Standards STAR Program, TÜV/Rheinland Ergonomics Approved 100-120 VAC Certifications and CE, CB, TÜV Rheinland/GS, TCO'03 Standards...

  • Page 55: Beeper Settings

    Beeper settings ScreenManager item selected. ScreenManager parameter adjusted to minimum or maximum Short beep limit. Input Signal Selection button pressed. Auto Adjustment button pressed. Long beep ScreenManager data-save executed. Monitor not connected correctly. 4 short beeps PC turned off. Monitor received unsupported signal frequency. 2 short beeps Monitor is in the advance notice mode of the Off Timer.
  • Page 56 1 TMDS Data 2- 11 2 TMDS Data 2+ 12 TMDS Data 2/4 Shield DDC Clock (SCL) DDC Data (SDA) Vertical Sync 9 TMDS Data1- 19 10 TMDS Data1+ 20 USB Ports Signal Signal TMDS Data 1/3 Shield +5V Power Ground (return for +5V, Hsync...
  • Page 57 Afterimage The Afterimage is particular to LCD monitors when the monitor screen is left on for a long period without use. The "Afterimage" can be removed gradually by changing the displayed image. Clock With the analog input signal display, the analog signal is converted to a digital signal by the LCD circuitry.

  • Page 58: Gain Adjustment

    DVI (Digital Visual Interface) A digital flat panel interface. DVI can transmit digital data from the PC directly without loss with the signal transition method "TMDS". There are two kinds of DVI connectors. One is DVI-D connector for digital signal input only.

  • Page 59: Range Adjustment

    The LCD panel consists of a fixed number of pixel elements which are illuminated to form the screen image. The EIZO CG19 display panel consists of 1280 horizontal pixels and 1024 vertical pixels. At a resolution of 1280 x 1024, all pixels are displayed as a full screen.
  • Page 60 VESA DPMS (Video Electronics Standards Association - Display Power Management Signaling) The acronym VESA stands for "Video Electronics Standards Association", and DPMS stands for "Display Power Management Signaling". DPMS is a communication standard that PCs and graphics boards use to implement power savings on the monitor side.
  • Page 61 Preset Timing Chart for Analog input Timing-Übersichten für Analog Eingang Synchronisation des Signaux pour Analog numerique Based on the signal diagram shown below 25 factory presets have been registered in the monitor's microprocessor. Der integrierte Mikroprozessor des Monitors unterstützt 25 werkseitige Standardeinstellungen (siehe hierzu die nachfolgenden Diagramme).
  • Page 62 VESA 31.5 MHz 640×480 VESA 36.0 MHz 640×480 VESA 36.0 MHz 800×600 VESA 40.0 MHz 800×600 VESA 50.0 MHz 800×600 VESA 49.5 MHz 800×600 VESA 56.3 MHz 800×600 VESA 65.0 MHz 1024×768 VESA 75.0 MHz 1024×768 VESA 78.8 MHz 1024×768 VESA 94.5 MHz 1024×768...
  • Page 63 [Applicable to gray cabinet.] Congratulations! The display you have just purchased carries the TCO'03 Displays label. This means that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world. This makes for a high performance product, designed with the user in focus that also minimizes the Impact on our natural environment.
  • Page 64 heavy metals such as cadium, mercury and lead. The requirements includes in this label have been developed by TCO Development in co-operation with scientists, experts, users as well as manufacturers all over the world. Since the end of the 1980s TCO has been involved in influencing the development of IT equipment in a more user- friendly direction.
  • Page 66 (schlechte Erkennbarkeit, Augenbelastung bei zu geringem Zeichenkontrast.) Recycle Auskunft Die Rücknahme dieses Produktes nach Nutzungsende übernimmt EIZO in Deutschland zusammen mit dem Partner von Roll MBB Recycling GmbH. Dort werden die Geräte in ihre Bestandteile zerlegt, die dann der Wiederverwertung zugeführt werden.
  • Page 67 DE BRANC HE SWICO. http://www.swico.ch Recycling Information for customers in USA: All recycling information is placed in the Eizo Nanao Technologies, Inc.'s website. http://www.eizo.com/contact/index.html Återvinnings information för kunder i Sverige: All information om återvinning finns på Eizo Nordics hemsida: www.eizo.se...
  • Page 68 Im Fall eines stehenden Benutzers muß die Befestigung des Bildschirmgerätes derart erfolgen, daß die Höhe der Bildschirmmitte über dem Boden zwischen 135 - 150 cm beträgt. Der Standfuß muß die Möglichkeit zur Neigung des Bildschirmgerätes besitzen (max. vorwärts: 5°, min. nach hinten =/> 5°) Der Standfuß...