1. Manuals
  2. Brands
  3. E.C. Woods Manuals
  4. Indoor Furnishing
  5. CALISTOGA COFFEE/END TABLE
  6. Assembly instructions

E.C. Woods CALISTOGA COFFEE/END TABLE Assembly Instructions

Hide thumbs
1
2
3

Advertisement

Table of Contents

Assembly Instructions

Tools Needed

Cordless Drill
6" #2 Square Drive Bit
Tape Measure
STEP 1: (a) Lay all pieces on a smooth soft surface such as cardboard or carpet to help avoid scratching. We suggest
using a 6" #2 square drive bit to fasten all screws (available at your local hardware store). Be careful to not over
tighten any of the fasteners.
CALISTOGA COFFEE/END TABLE
E.C. Woods, Inc. Outdoor Furniture
(a)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CALISTOGA COFFEE/END TABLE and is the answer not in the manual?

Questions and answers

Related Manuals for E.C. Woods CALISTOGA COFFEE/END TABLE

Summary of Contents for E.C. Woods CALISTOGA COFFEE/END TABLE

  • Page 1 Assembly Instructions E.C. Woods, Inc. Outdoor Furniture CALISTOGA COFFEE/END TABLE Tools Needed Cordless Drill 6” #2 Square Drive Bit Tape Measure STEP 1: (a) Lay all pieces on a smooth soft surface such as cardboard or carpet to help avoid scratching. We suggest using a 6”...
  • Page 2 STEP 2: (b) Place one of the side assemblies with the wider legs on a clean soft surface with the pocket holes facing up (c) (If you are assembling the coffee table go to STEP 4 (f) first) Line up the outside of the end assembly with the outside of the side assembly and then fasten the end assembly thru the countersunk holes to the side assembly using the 1 ½”...
  • Page 3 STEP 4: Coffee Table ONLY (f) Remove the aluminum reinforcing strips from the side assembly and set off to the side for later use. (g) Install the reinforcing strips using the 5/8” stainless steel round head screws provided. ecwoutdoorfurniture.com...

Table of Contents