Video Input; Input Source Selection - Eiki LC-SE10 Owner's Instruction Manual

Video Input

Input Source Selection {Video, S-Video, (Y, Pb/Cb, Pr/Cr)}
Direct Operation
Choose Video by pressing the INPUT button on the top control or the
VIDEO button on the remote control.
Before using these buttons, correct input source should be selected
through menu operation as described below.
Menu Operation
1 Press the MENU button and the On-Screen Menu will appear.
Press the Point Left/Right button to move the red frame pointer
to the Input Menu icon.
2 Press the Point Down button to move the red arrow pointer to
Video and then press the SELECT button. The Source Select
Menu will appear.
3 Move the pointer to the source that you want to select and then
press the SELECT button.
When selecting Auto, the projector automatically detects
Auto
incoming video signal, and adjusts itself to optimize its
performance. The projector selects connection in the
following order:
1st Y, Pb/Cb, Pr/Cr
2nd S-Video
3rd Video
The Y, Pb/Cb, Pr/Cr jacks has priority over the S-VIDEO
jack under the condition of connecting both the Y, Pb/Cb,
Pr/Cr jacks and the S-VIDEO jack.
The S-VIDEO jack has priority over the VIDEO jack under
the condition of connecting both the S-VIDEO jack and
the VIDEO jack.
When video input signal is connected to the VIDEO jack,
Video
select Video.
When video input signal is connected to the S-VIDEO
S-Video
jack, select S-Video.
Y, Pb/Cb, Pr/Cr
When video input signal is connected to the Y, Pb/Cb,
Pr/Cr jacks, select Y, Pb/Cb, Pr/Cr.
NOTE
G
See "Computer Input" on page 25 for a signal compatible with HDCP.
INPUT button
Video
Computer 1
✽
Computer 2
VIDEO button
Video
✽
When Monitor out is selected at the Terminal item
in the Setting Menu, Computer 2 is not displayed.
See "Terminal" item on page 40.
Input Menu
VIDEO
Source Select Menu (VIDEO)
Move the pointer to the source that you want to select
and press the SELECT button.
✽
When Monitor out is selected at the Terminal item in the
Setting Menu, Computer 2 is not displayed.
"Terminal" item on page 40.
Move the pointer to
Video and press the
SELECT button.
See
33