Top - Eiki LC-SE10 Owner's Instruction Manual

Top

This projector has control buttons and indicators on its top.
e
r
t
q
POWER ON–OFF button
Turns the projector on or off. (p19)
w
AUTO SET UP button
Operate AUTO SET UP function. (p21)
e
ZOOM/FOCUS button
Select ZOOM or FOCUS function. (p20)
r
IMAGE button
Select image level. (p30, 36)
t
AUTO PC ADJ. button
Operates the AUTO PC Adjustment function. (p27)
y
POWER indicator
Flashes red until the projector gets ready to be turned on. It
turns red when the projector is in the stand-by mode. It
remains green while the projector is under operation. (p49)
u
WARNING indicator
Lights red when the projector detects abnormal condition. This
also flashes red when the internal temperature of the projector
exceeds the operating range. (p43, 49)
q w
o !0 !1 !2
i
LAMP REPLACE indicator
Turns yellow when the life of the projection lamp draws to an
end. (p45, 49)
o
POINT (Up/Down/Left/Right ) button
Selects an item or adjusts value in the On-Screen Menu. These
are also used to pan the image in the Digital zoom +/– mode.
(p32)
Point Left/Right button are used as VOLUME +/– button. (p22)
!0
MENU button
Opens or closes the On-Screen Menu. (p23)
!1
SELECT button
Executes the item selected. It is also used to expand /
compress the image in Digital zoom +/– mode. (p32)
!2
INPUT button
Selects input source. (p25, 33)
Part Names and Functions
y
u
i
11